Removing ceiling light in a Bullet Crossfire 1800 RB

[pnwham]

After many searches, I just can't believe how many different models of ceiling lights have been used over the years. I'm trying to remove one in my Bullet Crossfire to access the 12 V, and just can't seem to figure it out. I'm not sure if the whole thing comes off, or if I just need to remove the lenses to get to the mounting screws. I've tried squeezing all around with not success. I wonder if anyone who has this model of light has figured it out. See photo (hope it worked)

[66joej]

Use the thinnest flat screwdriver you have and insert between the lens and light body. It should pop off. Held to the fixture with tabs on the lens. At least that's how mine are.

[busterbrown]

What Joe said is correct. Use a very small flat blade screwdriver and pry between the white body and clear lens. I have them on my coach and they pop right off.

[pnwham]

Thanks, guys...I was playing with what looked like tabs at the end near the switch with no luck. Tried the thin screwdriver at the other (thinner) end and bingo, it popped right off. Thanks again.