6’ LED Light strip Came Off on Front

[DaveAlb]

Light strip above Cougar name came mostly off on road yesterday. Still attached on driver’s side and laying on roof. Still works. Looking for ideas on how to reattach. I was thinking cleaning area with mineral spirits and using silicone adhesive. Gorilla glue perhaps? All ideas appreciated!

[DaveAlb]

Part of me just wants to cut it off and terminate the wires somehow. The lights aren’t all that important to me. My wife may have another opinion though.

[chuckster57]

We use spray adhesive. Mask off the cap, use tape on the led side to hold the strip. Spray both surfaces, let dry and press. It works real good. I use a good cleaner on the trailer and nothing in the led strip.

[JRTJH]

Although it's not a car, it is an automotive finish and it is a piece of trim...

I use 3M trim adhesive and so far have never had to reattach a light two times...

https://www.amazon.com/3M-03601-Plas.../dp/B000CCM3J2

[dutchmensport]

Double sided tape.

I'm sure you can find it somewhere else... like Wall Mart or a Home Depot type store:

click here

Further search.... I was right ... Wall Mart:

click here

[chuckster57]

Originally Posted by dutchmensport

Double sided tape.

I'm sure you can find it somewhere else... like Wall Mart or a Home Depot type store:

click here

Further search.... I was right ... Wall Mart:

click here

Only issue with double sided tape is the thickness and the exposure of the edges.

[travelin texans]

I wouldn't stick it on too well so in a month when half of them quit working it won't be too difficult to replace them.

[DaveAlb]

They sure weren’t stuck in too well the first time!

[bearcat77]

Yours fared better than mine. I all have left is little stub sticking out of the cap!

[DaveAlb]

Gluing it back on today. Wife will be getting on the roof and I will assist!