Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Toy Haulers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 08-01-2021, 09:14 PM   #1
TheStatelineATV
Junior Member
 
Join Date: Jul 2021
Location: USA
Posts: 12
Parts needed

06-7 raptor 3712.
12?gal boiler. Propane electric valve...
I don't know how these parts are called but I'm looking for some rebuild kits if any available.? I'm not in a hurry to buy new boiler, I rather replace some parts to have it working properly ... part on picture is bad need to be replaced, and the metal rod that goes inside with rubber gasket and spring, not sure if need to replaced, but rather put new rubbers while I'm there... enyone has gooduck finding parts/rebuild kits? TIA.
Click image for larger version

Name:	20210726_161009.jpg
Views:	27
Size:	65.2 KB
ID:	35051
TheStatelineATV is offline   Reply With Quote
Old 08-02-2021, 01:40 AM   #2
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 7,818
That looks like the gas valve coil. You're going to need a make and model number to get the part.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is offline   Reply With Quote
Old 08-02-2021, 01:52 AM   #3
John&Genny
Senior Member
 
Join Date: Mar 2017
Location: Colbert
Posts: 237
Quote:
Originally Posted by TheStatelineATV View Post
06-7 raptor 3712.
12?gal boiler. Propane electric valve...
I don't know how these parts are called but I'm looking for some rebuild kits if any available.? I'm not in a hurry to buy new boiler, I rather replace some parts to have it working properly ... part on picture is bad need to be replaced, and the metal rod that goes inside with rubber gasket and spring, not sure if need to replaced, but rather put new rubbers while I'm there... enyone has gooduck finding parts/rebuild kits? TIA.
Attachment 35051
Although some people here like Chuckster might be able to just look at the part and tell you what you need to know, you are usually much better off if you can provide more information. For example, is the hot water heater a Atwood, Dometic, or ??? If there is a label inside, is their a model number shown? On the picture you show, there is number of either C6127 or 06127. Were there any other numbers imprinted on the part? The more information you can provide, the more likely we can help you.
__________________
2017 Avalanche 320RS 5'er
2008 Duramax 2500HD Diesel
Andersen Ultimate 5th Wheel hitch
John&Genny is offline   Reply With Quote
Old 08-02-2021, 02:08 AM   #4
notanlines
Senior Member
 
notanlines's Avatar
 
Join Date: Oct 2014
Location: Germantown, TN
Posts: 5,330
See if any of these look likely:
https://www.google.com/search?q=gas+...WegCcwQ4dUDCA4
On edit: To bolster Chuckster's statement below, I would not rebuild anything in a water heater.
__________________
Jim in Memphis
Wife of 49 years is Brenda
2019 F450 6.7 Powerstroke
2017 Mobile Suites 40RSSA
2015 26TBUD Salem Forest River (For Alaska Trip)
2001 Road king w/matching Harley sidecar
notanlines is offline   Reply With Quote
Old 08-02-2021, 03:39 AM   #5
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 14,673
I would get a whole new gas valve.
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 08-02-2021, 04:23 AM   #6
TheStatelineATV
Junior Member
 
Join Date: Jul 2021
Location: USA
Posts: 12
Suburban manufacturing.co.
More info in picture. Click image for larger version

Name:	20210802_071916.jpg
Views:	24
Size:	85.4 KB
ID:	35052Click image for larger version

Name:	20210802_072014.jpg
Views:	30
Size:	79.4 KB
ID:	35053
TheStatelineATV is offline   Reply With Quote
Old 08-02-2021, 04:32 AM   #7
TheStatelineATV
Junior Member
 
Join Date: Jul 2021
Location: USA
Posts: 12
Quote:
Originally Posted by chuckster57 View Post
I would get a whole new gas valve.
Probably I end up getting new valve, but I wonder if there is a website for RV parts that I could order from...
TheStatelineATV is offline   Reply With Quote
Old 08-02-2021, 04:38 AM   #8
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 14,673
Amazon has them for about $50.00
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 08-02-2021, 04:50 AM   #9
jasin1
Senior Member
 
jasin1's Avatar
 
Join Date: Aug 2020
Location: Middle River
Posts: 2,467
Quote:
Originally Posted by chuckster57 View Post
I would get a whole new gas valve.
I agree 100% the only time I’d consider replacing the coil is if it was a momentary short that happened while I was working on it and I knew that was the only problem.
Gas valves are cheap and it’s not something that you want to try and save pennys on.
Things that can go boom are not where I try and save a buck.
Are you sure the gas valve is not just stuck and the coil is fine? (Don’t try and unstuck it ) you could end up with a gas valve that does not fully close and “passes gas” into the burner box

Either way it needs to be replaced.
I am a licensed gas fitter in natural and lp gases as well
__________________
2020 Cougar 315 RLS
2020 Ram 3500 6.7HO 4.10 Dually Aisin
jasin1 is offline   Reply With Quote
Old 08-02-2021, 07:10 AM   #10
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 22,143
I agree with all that have suggested replacing the entire gas valve assembly. Taking apart a "sealed LP/NG valve to rebuild it sets up a significant risk of having a leaking gas valve inside an RV that is often used far from any fire department response in a trailer that usually has people sleeping directly over the water heater.

THIS IS NOT A PLACE TO TRY TO SAVE A FEW DOLLARS !!!!!

Replace the entire gas valve assembly !!!!!
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Old 08-02-2021, 08:34 AM   #11
jim1
Senior Member
 
jim1's Avatar
 
Join Date: Jan 2019
Location: Coaldale (Southern Alberta)
Posts: 144
Hi, I had an issue with the water heater not firing up on propane. You could hear the solenoids clicking but apparently weren't opening. I replaced the gas valve and everything is working great (knock on wood). And since I can't leave things alone I tore the old valve apart and cleaned the plungers on the solenoids and tested them, re-installed it on the water heater worked, like brand new. But because it is a gas valve that could cause a fire or lots of damage I removed it and put the new one back on. I know, but I really had nothing better to do other than find out why and how it ticks. But for sure put a new valve on it's the safest and only way to go.
__________________
& Jim & Tovi
2019 Cougar 315RLS w/ Reese Sidewinder pin box
2011 Ram Larime CC 3500 SB 4x4 w/ Reese 5th wheel hitch
Retired-Lovin' 7 Saturdays a week!!
jim1 is offline   Reply With Quote
Old 08-02-2021, 10:12 AM   #12
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 22,143
Quote:
Originally Posted by jim1 View Post
Hi, I had an issue with the water heater not firing up on propane. You could hear the solenoids clicking but apparently weren't opening. I replaced the gas valve and everything is working great (knock on wood). And since I can't leave things alone I tore the old valve apart and cleaned the plungers on the solenoids and tested them, re-installed it on the water heater worked, like brand new. But because it is a gas valve that could cause a fire or lots of damage I removed it and put the new one back on. I know, but I really had nothing better to do other than find out why and how it ticks. But for sure put a new valve on it's the safest and only way to go.
I'm a "tinkerer" too. It's hard to resist not "trying to outsmart or outfix the manufacturer"... I can't begin to count the number of "old 8 transistor radios", TV's, Stereos, hand mixers, blenders, toasters, even Timex watches (when they were the kind that "keeps on ticking" that I took apart, "fixed" and tried to put back together. Sometimes they worked perfectly, sometimes I had a couple of "extra parts" and sometimes I got them apart, "fixed" and put them back together and they worked for a couple of minutes or so, then "BOOM" either the smoke escaped or the Timex stopped ticking.....

On an item with "severe consequences if it fails" like you, I want to fix it, but the 'better part of valor' tells me that even if it works, it may not be the best choice to rely on it in a "life/death" situation.
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Old 08-02-2021, 01:54 PM   #13
TheStatelineATV
Junior Member
 
Join Date: Jul 2021
Location: USA
Posts: 12
Thanks . Ordered complete new valve.
Now next part needed [or not?] is fridge main board [or something else?]... Sizors/players on picture aint my magic... bought it this way....front panel , led code 5blinks every 3sec.? Bypass 110V work. Propane doesn't work... any clues where to start? TIA.Click image for larger version

Name:	20210705_203636.jpg
Views:	23
Size:	87.3 KB
ID:	35075Click image for larger version

Name:	20210723_105754.jpg
Views:	17
Size:	83.6 KB
ID:	35076
TheStatelineATV is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RVģ is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 01:13 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.