HOW DO YOU INSTALL A dometec dm2872 frig door handle ??

[Dave fromRockcliffeTheSea]

This door handle has tabs and looks like it should click into place around the moldings on the fridge door and then two screws secure it but just won't quite click into place. Help !!

[chuckster57]

If memory serves me right, you have to slide one edge in first.

[Dave fromRockcliffeTheSea]

Originally Posted by chuckster57

If memory serves me right, you have to slide one edge in first.

The moldings on the top of the door are in the way when you try to slide it in. If I could figure out how to relax either the molding on the top or the side of the door it looks like it would slide in easily. It looks so simple it is very frustrating.

[Dave fromRockcliffeTheSea]

Could sure use some suggestions on this refrigerator door problem. Haven't been able to fix it yet.

[Javi]

Originally Posted by Dave fromRockcliffeTheSea

Could sure use some suggestions on this refrigerator door problem. Haven't been able to fix it yet.

See page 41

https://www.manualslib.com/manual/16...page=41#manual

[Dave fromRockcliffeTheSea]

Originally Posted by Javi

See page 41

https://www.manualslib.com/manual/16...page=41#manual

Couldn't follow the link.
Anyway should anybody have the same problem the molding on the top of the door does pull off. Very hard at the corner but it does. I was afraid it was going to break. Then the handle simply slides down the side of the door with the tabs on the handle lined up with the molding on the side of the door.