Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Tech Forums > Keystone Questions
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 11-17-2016, 08:04 PM   #1
JOLIEDLI
Junior Member
 
Join Date: Jul 2012
Location: Washington
Posts: 3
Cargo Rack question

Hello,
I own a Hideout trailer, model 19FLBWE. I recently purchased a generator and instead of putting it in the cargo area underneath the bed, I would like to put a cargo rack on the back of the trailer. The bumper is not completely exposed or at least not enough to put a trailer hitch receiver on top of the bumper--I would have to put it on the bottom of the bumper and mount the cargo rack that way. I'm concerned about the overall height of the rack and whether the bumper would be strong enough to hold it. The cargo racks that I've been looking at can hold up to 300-500 lbs. Not that I would put that much weight on it, but I'm concerned about the strength of the bumper overall. Has anyone had an experience of adding a cargo rack to the back of their trailer? Any tips or suggestions would be appreciated.

JOLIEDLI
JOLIEDLI is offline   Reply With Quote
Old 11-17-2016, 09:14 PM   #2
Ken / Claudia
Senior Member
 
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
Re: Cargo Rack question

That bumper is thin steel metal. Do not mount anything to it. Some have lost the spare tire as it was to much. That area is the worst place for bouncing. After spending awhile on freeways look at the bumper of others RVs as you pass them and see how and what is attached to it. Than notice some have a lot of bounce that ends up breaking welds or bends metal. To do what you want can be done as some on here have. They custom build a frame rail to the frame and mount or hang items on. Just afew years ago some where having they bicycles on the pull out bumper tray bend or break off.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
Ken / Claudia is offline   Reply With Quote
Old 11-18-2016, 07:47 AM   #3
Larry1013
Senior Member
 
Join Date: Aug 2014
Location: Tallassee, AL
Posts: 191
Re: Cargo Rack question

Curtis MFG makes some trailer hitches that attach between the frame rails. The are more substantial than attaching to the trailer bumper.

http://www.curtmfg.com/Category/13/R...iler%20Hitches
__________________
Larry

2015 F350 Ultra Lariat CrewCab Long Bed 6.7L
2005 Keystone Outback Sydney 30FRKS
Larry1013 is offline   Reply With Quote
Old 11-18-2016, 08:04 AM   #4
Jetfixer03
Member
 
Join Date: Oct 2016
Location: Denver
Posts: 84
Re: Cargo Rack question



This should convince you.
Jetfixer03 is offline   Reply With Quote
Old 11-18-2016, 11:30 AM   #5
Murphsmom
Senior Member
 
Join Date: Jul 2013
Location: Idaho
Posts: 289
Re: Cargo Rack question

We do store some totes on the slide out rack on the back of the Cougar. HOWEVER, we always move them to the bed of the pickup when going down the road and fully retract the rack. The generator rides in the bed of the pickup and stays in the garage during the winter.
Murphsmom is offline   Reply With Quote
Old 11-18-2016, 12:22 PM   #6
Larry1013
Senior Member
 
Join Date: Aug 2014
Location: Tallassee, AL
Posts: 191
Re: Cargo Rack question

Quote:
Originally Posted by Jetfixer03 View Post
He went to all the trouble to beef up a section but over all he didn't solve his problem of a future breakage of the bumper.

I believe if it were me, I would have purchased some tubing with a thicker wall.
__________________
Larry

2015 F350 Ultra Lariat CrewCab Long Bed 6.7L
2005 Keystone Outback Sydney 30FRKS
Larry1013 is offline   Reply With Quote
Old 11-09-2019, 01:06 PM   #7
Auggie Waterman
Member
 
Auggie Waterman's Avatar
 
Join Date: May 2018
Location: Saint Augustine
Posts: 31
Bike rack on bumper hitch.

Thanks for the link to the movie. I checked out my bumper on our 2017 Hideout 308BHDS pretty well. The frame stops before the end of the trailer box and there is a 2"x4" metal extension that goes out to the bumper. And the bumper has reinforced angle metal welded on both sides, not like the super cheapie in the video. Also, my bike rack has a threaded bolt that takes out the play so the rack doesn't move around in the hitch. Gonna give it a try on a 195 mile trek for Thanksgiving, let ya'll know how it goes. The two bikes I'm going to try with are $125 bikes also and I'm going to strap the frames to the bumper so if it fails it won't be in traffic. rack weighs about 27, each bike 22lbs. So about 70lbs. We can also see the setup in our rear-view wireless cam and we'll stop a couple times to check for any signs of failure.



Quote:
Originally Posted by Jetfixer03 View Post
Attached Thumbnails
Click image for larger version

Name:	bumper1.jpg
Views:	234
Size:	78.5 KB
ID:	24319   Click image for larger version

Name:	bumper2.jpg
Views:	247
Size:	145.3 KB
ID:	24320   Click image for larger version

Name:	bumper2Frame.jpg
Views:	221
Size:	85.1 KB
ID:	24321   Click image for larger version

Name:	bumphitch1.jpg
Views:	237
Size:	187.0 KB
ID:	24322  
Auggie Waterman is offline   Reply With Quote
Old 11-09-2019, 01:09 PM   #8
Auggie Waterman
Member
 
Auggie Waterman's Avatar
 
Join Date: May 2018
Location: Saint Augustine
Posts: 31
added pics

Added a couple pics.
Attached Thumbnails
Click image for larger version

Name:	rackedBiles.jpg
Views:	245
Size:	172.6 KB
ID:	24323   Click image for larger version

Name:	rack.jpg
Views:	260
Size:	139.0 KB
ID:	24324  
Auggie Waterman is offline   Reply With Quote
Old 11-09-2019, 04:10 PM   #9
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,846
If you're satisfied that you think it'll be strong enough, give it a try...

A comment I'd make is that you might consider turning the CURT hitch around (upside down) so the 2" square tube is on top of the bumper. That will gain you about 5" of height for the front tire of the bike that has the front wheel/tire sitting below the bumper. As it is, that's a "sure bet to be damaged" if you happen to hit any incline at a gas station or campground road/curb.

Oh, and don't forget that 70 pounds you calculated: You didn't add in the 70 or so for the spare tire, wheel and carrier.... Total, closer to 150-175 pounds that'll be bouncing up and down at towing speed...
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Old 11-10-2019, 03:20 AM   #10
notanlines
Senior Member
 
notanlines's Avatar
 
Join Date: Oct 2014
Location: Germantown, TN
Posts: 6,309
We'll all look for the results and video on youtube and Facebook.
__________________
Jim in Memphis, Wife of 51 years is Brenda
2019 F450 6.7 Powerstroke
2018 Mobile Suites 40RSSA
2021 40' Jayco Eagle
2001 Road king w/matching Harley sidecar
2021 Yamaha X2 Wolverine 1000
notanlines is online now   Reply With Quote
Old 11-10-2019, 05:10 AM   #11
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
First thing that comes to mind....
"Archimedes ... Give me a lever long enough and a fulcrum on which to place it, and I shall move the world." or " torque is force times distance travelled, so by pushing with the same force for 10 times the distance, you generate 10 times the torque."

If you have a 3' "lever" holding X weight, at say 12" to q18" away from the top of that lever, then add impact force - the same impact that an impact gun is used to loosen a bolt (the merrily bouncing down our fine roadways)...well good luck.

The YouTube video? Well for me it seems like a huge hack job to an OEM hack job. Lots and lots of labor trying to make a "silk purse out of a sow's ear". To me it's like putting mag wheels on a garbage truck, it's still a garbage truck.

FWIW ...I love YouTube videos and the WWW. So far I've seen "real" footage of bigfoot, aliens, Nessie, Chupacabras, Elvis sightings after 1977, JFK sightings after 1963, "evidence" that the US Government blew up the twin towers, "proof" that the Nazi Holocaust wasn't real, and a bunch of "honest" politicians.

JMHO
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is online now   Reply With Quote
Old 11-10-2019, 06:09 AM   #12
Snoking
Senior Member
 
Snoking's Avatar
 
Join Date: Aug 2018
Location: Lake Stevens
Posts: 764
Carry bikes

DW want to bring bikes as we travel back and forth the Arizona. We bought a Laredo 225MK as our commuter trailer, and I moved the observation camera from the Bighorn to the Laredo. Even with the camera there was no way I wanted to carry the bikes on the rear of the little trailer.

So I found an used($25) Yakima fork bar made to mount in the front of a picked bed between the bed rails. It is similar to this one for a narrower bed. https://www.ebay.com/itm/OEM-2-Bike-...EAAOSwey5cqqxA I had to in my case make mounts to mount it above the Bakflip bed cover. The front mounts clamp the the front tie downs.

Well it worked great on the trip down to Arizona this fall. I can watch the bikes in the rear view mirror. Very happy with the
Attached Thumbnails
Click image for larger version

Name:	IMG_20191003_142122.jpg
Views:	209
Size:	212.2 KB
ID:	24325  
__________________
2019 Laredo 225MK for travel. Bighorn 3575el summer home in Washington, Park Model with Arizona Room for winters.
2015 RAM 3500 SRW CC SB Aisin Laramie
Snoking is offline   Reply With Quote
Old 11-10-2019, 08:44 AM   #13
Auggie Waterman
Member
 
Auggie Waterman's Avatar
 
Join Date: May 2018
Location: Saint Augustine
Posts: 31
Thanks

Quote:
Originally Posted by notanlines View Post
We'll all look for the results and video on youtube and Facebook.
Thanks for the well-wishes Jim, the very same to you. Bless your heart.
Auggie Waterman is offline   Reply With Quote
Old 11-10-2019, 06:05 PM   #14
Ken / Claudia
Senior Member
 
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
I have mentioned this a few times, no one has wanted to follow up. Take a test drive on the highway and have someone follow and see how much bounce you have, not sure a camera will catch it. Nearly everything I see mounted on the rear bumper looks like a yo-yo.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
Ken / Claudia is offline   Reply With Quote
Old 11-10-2019, 06:19 PM   #15
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
"Gonna give it a try on a 195 mile trek for Thanksgiving, let ya'll know how it goes. The two bikes I'm going to try with are $125 bikes also and I'm going to strap the frames to the bumper so if it fails it won't be in traffic. rack weighs about 27, each bike 22lbs. So about 70lbs. We can also see the setup in our rear-view wireless cam and we'll stop a couple times to check for any signs of failure."

Strapping the frames to the bumper won't help if the number Peels off. You didn't list the weight of the spare tire and mount in your calculation. Can you imagine what damage could occur to someone following you at 65 m.p.h. if that fell of and went thru the windshield?

Personally I could not justify the risk of maiming or potentially killing someone because I didn't was reluctant to spend the money to either have a proper hitch installed. Seems like a "risky" experiment to me.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is online now   Reply With Quote
Old 12-02-2019, 08:44 AM   #16
Auggie Waterman
Member
 
Auggie Waterman's Avatar
 
Join Date: May 2018
Location: Saint Augustine
Posts: 31
Update: the bikes/rack/spare were all fine on the trip, no issues at all. Pretty robust reinforced bumper, thanks Keystone! I did use nylon rope to tie the rack & bikes to my frame just in case, but was not needed. I could see them well in my backup cam also, gave me piece of mind.
__________________
2017 RAM 2500 4x4 6.7 Cummins, Patriot 18k slider hitch, 2018 Hideout 308BHDS.
Auggie Waterman is offline   Reply With Quote
Old 12-02-2019, 12:54 PM   #17
Roscommon48
Senior Member
 
Join Date: Dec 2018
Location: grand rapids
Posts: 596
If you want to do this work with a welder who can recommend some options.
Roscommon48 is offline   Reply With Quote
Old 12-02-2019, 03:25 PM   #18
wiredgeorge
Senior Member
 
wiredgeorge's Avatar
 
Join Date: Nov 2017
Location: Mico, TX
Posts: 7,395
Dumb question... would not ask but was thinking about buying a couple of inexpensive bikes from CL (like those intended for a geezer and his youthful wife) and just opening the door on my 5ver and chunking them in the trailer. My rear bumper is made of 1/16" think tin foil and no way I would mount anything to that.
__________________
wiredgeorge Mico TX
2006 F350 CC 4WD 6.0L
2002 Keystone Cougar 278
2006 GL1800 Roadsmith Trike
wiredgeorge is offline   Reply With Quote
Old 12-03-2019, 09:04 AM   #19
Ken / Claudia
Senior Member
 
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
Robust bumpers on RVs, the last factory ones I seen were dropped around the 1970s. But, I do agree if you keep the load on the bumper from bouncing independently from the bumper, it will last longer. I had a 1996 park trailer on coastal property. I repainted the bumper yearly and sometimes once every 2 years. No matter, it rusted, some clear through the bumper in spots by the 10 year mark.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
Ken / Claudia is offline   Reply With Quote
Old 12-03-2019, 09:26 AM   #20
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
Quote:
Originally Posted by Auggie Waterman View Post
Update: the bikes/rack/spare were all fine on the trip, no issues at all. Pretty robust reinforced bumper, thanks Keystone! I did use nylon rope to tie the rack & bikes to my frame just in case, but was not needed. I could see them well in my backup cam also, gave me piece of mind.
Sounds like you had a first successful trip. Just bear in mind if the bumper fails your first indication will be the bumper and the attachments dragging, or bouncing down the highway behind you. Without expensive testing equipment there is no way to know if the metal has been fatigued or not. Think of bending an aluminum can, or thin sheet of metal back and forth until it breaks. Typically there is no indication of "cracking" or "fatigue" until it fails.

I wish you all the luck in the world but for me if I see a bunch of stuff affixed to a trailer bumper I'm staying far away.
JMHO
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is online now   Reply With Quote
Reply

Tags
rack

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 06:09 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.