Quote:
Originally Posted by hsmunoz
I saw the pics mate, nice job, but if the roof is rubber, what did you anchor the home made Z brackets too?
TIA
|
I will be anchoring them right thru the roof membrane into the plywood using lag bolts for each panel. The lag bolts I bought have a gasket seal at the end, they're normally used for satellite dish installations. Not necessary just another extra level of prevention. Once that is done, each Z bracket & Lag bolt head will be sealed with Dicor Lap Sealant. I will probably use 1 tube for each solar panel, coating them completely so there is no chance of water getting through front, back, sides or top. It's self leveling and a few hours of good weather it sets up nicely.