Quote:
Originally Posted by DavidAndDonna
sounds good was just looking for some input. Don't like being broke down on the road.
I suspect "IF" we have issue the exhaust fan mod should do the trick.
Thanks
|
Nothing wrong with being prepared. We’ve had our Alpine pretty much all over the western states.. been down in Nevada in 100 plus temps.. I’ve found the OEM fans have done fine for the RM1350..
I have often considered and thought about adding some fans back behind the unit or up higher at the upper vent .. mine is installed in a slide out so cooling concerns are more critical with this type of install
That said I’ve not had any issues with my setup..
I also looked at the ARP add on and while it has its merits I didn’t see the need for it 8 years ago and still don’t today
If the fridge is installed in a slide out the the placement of the upper baffle is key to good operation .. some folks make the mistake of removing the baffle because it blocks 1/2 of the coils . It’s designed that way..
I prefer to keep things in my RV as much as OEM as possible because it makes TS easier down the road should the need arise.
When you add in a bunch of other after market items they may work great until they fail.. then TS might be a tad more difficult .. especially if you ve forgotten the specifics of the add on items
It also makes TS more difficult for the next fellow should you sell the RV.. then the OP has no idea what extras have been added in the circuit
YMMV