Heating and cooling registers

[asherdav]

Does any make dampening round ceiling and rectangular heat registers that you might recommend? I would like to have several of both to regulate zones a little more efficiently. Both are ducted in a 2018 cougar 25res.

[sourdough]

Amazon has these and others like it;

https://www.amazon.com/Valterra-A103...6%2CB07JMT9588

I've bought several to manage the AC/heat pump airflow. 4 vents in the bedroom was TOO much. I've not modified the floor registers as they perform well.

[asherdav]

Thanks I'm going to look new

[flybouy]

We replaced our floor registers as the OEM crap was too weak to step on. Be careful with closing off furnace registers as restricting too much flow will cause the furnace to overheat and shut down. Mine were "standard residential sized" registers so a trip to Home Depot, Lowes, WalMart, or online sources are easy. Just pop one out and measure the size of the hole then find what you like.

[philbtv]

The floor vent covers were the first things we replaced on our 2018 Cougar. All but one of them was caved in. Cheap construction. We went to Home Depot and found some great looking and much more solid floor registers. You can actually stand on these if you wanted to. Good luck.

[rhagfo]

Originally Posted by philbtv

The floor vent covers were the first things we replaced on our 2018 Cougar. All but one of them was caved in. Cheap construction. We went to Home Depot and found some great looking and much more solid floor registers. You can actually stand on these if you wanted to. Good luck.

Well even the heavyweight one from HD are bending in our unit. Two of them are right where we step. Looking into some cast iron ones on Amazon for $40 ea.