If they are hydraulic- the over ride is at the pump, using a socket to turn the pump.
If they are electric then you’ll have to look under the underbelly, on the opposite side of the slide, which may require cutting an access flap. The over ride will be on the motor/gearbox. Cut the flap so the “hinge” is at the front. Tape the other three sides when done. We use “scrim” tape made for coroplast, some people use gorilla or duct tape.
If they are cable, the override is at the gearbox above the slide inside mounted to the wall. You probably need to remove the top facia to access.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|