Quote:
Originally Posted by CedarCreekWoody
I've asked but the OP has never clarified just what he has. If it is 120 volt there should be a junction box.
|
If it is 120VAC, there may not be a junction box. Typically, there is a MOLEX connector to transition from the ROMEX to the "stranded cable" that is routed through a hole in the floor, through the "slide folding loom" and then into the slide. Often the cable is routed either inside the slide wall and to a surface mount outlet box. I haven't seen a "junction box" used to transition from ROMEX to "stranded cable" in many years. Reason, IMHO, is cost. The MOLEX is about $2 and the junction box, twist connectors and time to connect them, about $3.... Save a buck here and a buck there and pretty soon, it all adds up.
In these photos, you can see how the ROMEX transitions to "stranded cable"...