If your closing the valves completely and since all your drain lines have a downward slope you shouldn't get any water out of the cap at your next stop. If you are getting water then you may have a valve that's not sealing properly. As mentioned if you are getting additional water then a twist on valve will work to stop the water but obviously if you have a valve not sealing your just putting a band aid on the problem.
__________________
2015 Ram,3500,Dually,B&W,4.10s,Aisin,Limited,Silver
2018 Raptor,428SP w/full body paint
2012 Harley, Ultra Limited
|