OEM FIC Door locks

[weebl]

Simple question regarding the OEM FIC locks, which hopefully someone knows.

What are the sizes of screws used to hold together the inside and outside of the lock, as well as the strikeplate that goes on the door (not on the door jamb)?

When I replaced the lock after we bought the trailer (cheaper than rekeying), the new one did not come with the screws, and the old one had some missing.

Thanks!

[Ken / Claudia]

I do not know what screws it takes. But, do you have a 2nd door as most. Check that one. I rekeyed my doors for free my myself making a phone call. t

[weebl]

Originally Posted by Ken / Claudia

I do not know what screws it takes. But, do you have a 2nd door as most. Check that one. I rekeyed my doors for free my myself making a phone call. t

No second door on my 322QBS. I could get one of the screws and take to a hardware store, but it is parked an hour out of town at a relative's farm. Hoping to just go on my next trip out there with the needed screws.

[hankaye]

weebl, Howdy;

Have you checked with the manufacturer?
http://www.fastecindustrial.com/contact/default.html
Give them a call and they should be able to answer your question.

hankaye

[weebl]

So we ended up paying our relatives a visit over the weekend, and I was able to go take a couple of screws off as samples to match up. I just went to Home Depot over my lunch and found out the screws that go on the inside of the door, attaching the inside handle to the outside handle are 8-32, 3/4" long. The strikeplate on the door edge uses a flathead 8-32, 3/8" long. They had no 3/8", so I grabbed a 1/2" and will try it to see if it will still work.