There should be a gasket that’s on the frame, then when the window is installed, the screws are put in from the inside ring into the frame and pull the window tight.
I have found curved frames and front caps don’t play together well. Proper fix would involve removing the window, replacing gasket and re installing. You might be able to run a bead of sealant across the top and down the sides.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|