Lippert Remote Problems

[Bryce]

I have a lippert control board 13504. The remote operates the awning and slides and light. BUT. The switches do not work. I changed out the control board and it still does not work The board has power in and out and the outlets for each of the functions. It also has an outlet for some type of switch which is not the motors or lights. I can't figure out why the switches don't work. HELP!
Thanks

[jackparretta]

did you snyc you remote . i had to do that when i replaced the remote

[Javi]

Originally Posted by Bryce

I have a lippert control board 13504. The remote operates the awning and slides and light. BUT. The switches do not work. I changed out the control board and it still does not work The board has power in and out and the outlets for each of the functions. It also has an outlet for some type of switch which is not the motors or lights. I can't figure out why the switches don't work. HELP!
Thanks

Put the awning and slide in and turn the light off with the remote. Turn the remote off.. then see if the switches work..
Used to be that if you used the remote to run the slides, jacks, awning or lights that the switches wouldn't work