Landing gear skips

[Diver]

2018 Cougar 29 foot
landing gear skips when lifting rig
I checked gearbox and lubed ..
new motor ..
when it skips it makes a noise like a gear is skipping but the legs are both staying in synchronization

what to check next

[Gary R.]

Since you say the landing gear legs are staying in sync, it could be the gearbox is slipping internally.

It could be a gear is missing a tooth, or maybe it is loose on the motor shaft. Do you hear any odd noise in the motor/gearbox?

Since my experience with this particular system is limited. perhaps one of the other members with knowledge of it will chime in.

[Diver]

Originally Posted by Gary R.

It could be a gear is missing a tooth, or maybe it is loose on the motor shaft. Do you hear any odd noise in the motor/gearbox?

Since my experience with this particular system is limited. perhaps one of the other members with knowledge of it will chime in.

I did dissect the gearbox .. all looked great .. I re-lubed and reinstalled ...
it seems more in the reduction part of the motor ...but that's a new motor last fall which did not correct the issue ...
I am wondering if there is a slip issue in the motor gearbox .. Hmmm baffled ...

[Diver]

so after more investigation it seems the skip is in the motor gearbox .... not in the main gearbox ...not sure if it may have a slip clutch ... Hmmmm