Well, the vibration demons were exorcized but the job was a little more involved than I originally thought.
As chuckster57 recommend, I reclined the chairs and looked underneath, all that was there was plug for the heat.
So, I went looking the Massage plugs, I tipped the recliners forward to look underneath from the rear. No plugs there. I did notice on the back bottom of the chairs are flaps attached by Velcro. When I unattached the flaps, I founds plugs (2 per chair) for the Massage function. Simply unplugging them did the trick.
It went fairly well, although I did not notice that the chairs were screwed to the floor of the slide out a little too late. When tipping the chairs forward, I pulled out the screws. Luckily, I was able to screw them back into place. They were not really visible from the front. So, if anyone decides to do this task remember to find and unscrew them before moving the chair.
Thanks for the information I needed to get started!
__________________
Cougar 25rdswe 2021
|