On most trailers, the valance is a "luan box" covered with foam and upholstery material. The shade is screwed to the top of the valance box and then the entire assembly is screwed to the trailer sidewall/bottom of the overhead cabinet. Typically there are two #2 Roberts square drive screws, one near each end of the valance box. They will be behind (between) the shade upper bar and the sidewall of the trailer. On longer windows, you may find 3 or 4 or more screws, but on windows about the size of the side windows on your slides, there's only 2 screws.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|