|
12-16-2009, 05:27 PM
|
#1
|
Junior Member
Join Date: Dec 2009
Location: Kodiak Island, Alaska
Posts: 13
|
slide out and landing gear problems
We have a 2008 Fuzion 5th wheel. The last 2 times we stopped our slide outs would not work on electricity but would on battery, same with the landing gear. Today when we stopped our landing gear stopped working completely. We had to use the battery for the slide outs.
Any suggestions?
|
|
|
12-16-2009, 06:22 PM
|
#2
|
Site Team
Join Date: Jun 2009
Location: Venice
Posts: 5,346
|
The manufacturer of my slides (Lippert) recommends to only operate them on a fully charged battery. I'm not sure what slides you have but they may have similar instructions. As for the landing gear I have no suggestions other than checking fuses and connections on the rear of the switch.
.... If you have Lippert slides you can get manuals here http://www.lci1.com/index.php?option...d=54&Itemid=66
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|
|
|
12-16-2009, 06:50 PM
|
#3
|
Junior Member
Join Date: Dec 2009
Location: Kodiak Island, Alaska
Posts: 13
|
The slides work on battery only, not with electricity.
|
|
|
12-16-2009, 07:45 PM
|
#4
|
Site Team
Join Date: Mar 2009
Location: Fraser Valley BC Canada
Posts: 7,015
|
I am certain that your slides will only function with 12v ---they are wired directly to the battery. Unless your battery is fully charged, the slides will not operate properly. Check for loose connections or blown fuses. Same applies to the landing gear--- I would check the inline fuse located in the line coming off the control switch. I have had to replace the fuse once or twice on my landing gear.
__________________
2008 Cougar 5th Wheel 27RKS
2005 2500 GMC Duramax
|
|
|
12-16-2009, 07:54 PM
|
#5
|
Junior Member
Join Date: Dec 2009
Location: Kodiak Island, Alaska
Posts: 13
|
Thanks, we'll check in the morning. I appreciate the quick responses.
|
|
|
12-17-2009, 05:50 PM
|
#6
|
Senior Member
Join Date: Jul 2009
Posts: 145
|
Just to clarify...When you say that the slide works on battery but not on electricity I assuming that to make them work you have to unplug the trailer from "shore power". The slides always only use 12v power no mater if plugged in or not. Sounds to me like there is something interesting going on with your power. When plugged in things don't work points to the power converter /charger/breaker panel. Something is causing it to malfunction when plugged in. If nothing has changed i.e. you have not replaced or removed the batteries or changed any other electrical items in the trailer then I would suspect the converter or a short (may not be a direct short but what I call a high resistance short) that is on the shore side of the converter. Keep us posted please. BTW if my assumption at the beginning was incorrect then....never mind.
__________________
2010 Cougar 24RKS
2012 Dodge RAM 2500
6.7 Turbo
|
|
|
12-17-2009, 06:00 PM
|
#7
|
Junior Member
Join Date: Dec 2009
Location: Kodiak Island, Alaska
Posts: 13
|
It was a silly fuse. Works great now. Still new to this retirement and RVing. I appreciate all the help. Now if my oven would stay at the temp I set it then all would be great.
Thanks again.
|
|
|
12-17-2009, 06:21 PM
|
#8
|
Senior Member
Join Date: Mar 2009
Location: Alabama
Posts: 863
|
OH... Bennydog can tell you all about that!!
__________________
2005 Springdale 249BH FW
2008 Toyota Tundra Crewmax 5.7L
Tow package
Timbrens
|
|
|
12-31-2009, 06:45 PM
|
#9
|
Junior Member
Join Date: Apr 2009
Location: Stoney Creek Ontario
Posts: 2
|
I have a 2007 Springdale and it has never had a battery in it. I use shore power and everything works fine including the slides. Dealer told me a battery is not needed to run the slides.
|
|
|
12-31-2009, 08:04 PM
|
#10
|
Site Team
Join Date: Jun 2009
Location: Venice
Posts: 5,346
|
Quote:
Originally Posted by basmit1
I have a 2007 Springdale and it has never had a battery in it. I use shore power and everything works fine including the slides. Dealer told me a battery is not needed to run the slides.
|
The manufacturers (Lippert) paperwork that came with my trailer said the slide motor could be damaged if a battery was not in line to operate the slide. Perhaps you have a different slide, but I would hope the manufacturer knows the slide better than the dealer and I would follow their instructions since they are warrantying the motor. JM$.02
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|