Picked up the Tumbleweed from storage and brought to house to winterize, jack worked fine. Got to house was going to disconnect but it wont go down feels like a binding issue.
Hand crank does not work either Electric motor turns freely ( I took the head apart) It all seems to be in the actual jack screw mechanisim. This is the OEM jack.
There was water in the gear box but the amount of grease in there has kept it dispersed. I am thinking about drilling a drain hole on the bottom and adding a zerk fitting.
I removed the jack screw from the head and outer tube so now I have to find a way to unbind it.
Anyone else have issues like this?
Should I throw in the towel and just buy a new or better jack?