Outback 325bh outdoor kitchen door issue

[Packerbacker20]

Anyone else ever have a problem with the shocks & mounts on the outdoor kitchen door? I've bent 2 shocks and it ripped the mount out of the wall. Not really sure how to fix this. I've attached a few pictures. Thanks in advance

[HouseMouse]

Looks to me that alignment between the door and the other end have to curve around the door wall. Not exactly a straight open/close. Might want to readjust the mounting point to make it a straight shot at opening and closing rather than going around the wall. Just the way I'm viewing the photo.

[flybouy]

That looks crooked to me as well. Hard to tell from the pic but is the ball mount for the air lift facing the wall?

[travelin texans]

It also appears to me the strut rod actually has a curve in it.
I'd screw & glue a piece 1×2" or 1×4" x 6-8-10" long, whatever it takes to get the curve out, on the inside wall which would also give a better screw hold for the strut.
On the door side I epoxied a 2" wide × 6" piece, it's what I had laying around, of aluminum to the inside of the door & then put the screws for the strut bracket.