Pull-outs / drawers in bedroom open cabinets? Mod suggestions?

[dcg9381]

So the two "nightstand" things on my Keystone Carbon 327 are just about useless other than interior storage. They are basically big open cabinets without shelves or pull-outs.

Has anyone found a way to install rail or other pull-out systems in these things? They'd be much more useful as drawers.

Right side:
Opening: 9.5w x 25.5h
Interior: 12w x 27h


Left side:
Opening: 15w x 25.5h
Interior: 21wx28h


(sorry for the fuzzy photos, but you get the idea)

[Pull Toy]

When we set up our Alpine 3535, I added quite a few pre-finished shelving (Lowes or H'Depot) with the adjustable rail system brackets. It created twuce the usable storage shelving.

With the pre-finished shelving, the cut ends don't show if done right. Use masking tape to wrap around both sides before cutting to eliminate chipped edges. Just cut thru the middle of the tape.

Good Luck,

[dcg9381]

Thanks. You're indicating the pull them and re-install pre-finished shelving in their place - stuff that's configured with drawers, right?

I didn't even consider that.

Have any photos?