There is not a kit as far as I know. I made the frame and got the door off ebay. I used a stud finder to make sure there wasn't any structural beams in the way and I started by cutting out the inside first just incase there was something I missed. There is an aluminum square tube along the floor i had to be careful of, i used it to help secure the frame on the inside. There is thin sheet metal over the seems of the plywood on the walls, don't be alarmed when you run into them. I used a oscillating multifunction tool for cutting the hole.
__________________
2010 GMC Sierra
2016 Passport 2200RBWE
|