|
01-02-2014, 05:12 AM
|
#1
|
Senior Member
Join Date: Aug 2013
Posts: 138
|
19.5 wheels and 5th wheels
I just bought a 2012 GMC 3500 Denali dually yesterday, and it has 19.5 inch commercial tires (I think the wheels are semi wheels, according to the folks on the duramax forums). They believe (the duramax folks) that this will be a big issue towing a keystone fuzion 342 fifth wheel due to the higher bed height. I dread buying wheels and tires after just buying a truck, but will do what I need to do. I don't have the trailer yet, supposed to be picking it up in a week or two (need to get a hitch installed first). I'm hoping the truck isn't lifted (I'm a girl lol, and my husband is not a car/truck guy, so need to get someone to help me out here!)on top of things - doesn't appear to be, but what do I know.
So, thoughts on this? I need to measure the bed more accurately - but my rough estimate was that it was 55-57 inches high, ground to the top of the bed rails. What does a normal 2012 denali with the stock 17 inch tires sit at? I've read that most 5th wheels sit at 58-60 and if that's true, and my measurements are close, I'm not going to have enough clearance to sit level with 6 inches between.
These make the truck look higher in the back, but it really does sit level front to rear - the tonneau cover is deceiving.
Can't seem to get them to load properly from photobucket...
http://s285.photobucket.com/user/spt...56216630939634
http://s285.photobucket.com/user/spt...28198220507674
Also posted on RV Forums....
|
|
|
01-02-2014, 07:24 AM
|
#2
|
Senior Member
Join Date: Jun 2013
Location: Watervliet, Michigan
Posts: 213
|
If you get on the tire manufacturers web sight, you can take the tire size and look up the diameter of tires the truck has on it now. You can also do this for the OEM tires. This will tell you if the tires are any taller. By the pictures, the tires look to be a lower profile than stock so they may be the same diameter or at least close. If the tires are close to the same diameter as the OEM tires, you should be fine. Remember the truck will squat a little when the trailer weight is added.
__________________
Brett, DW Theresa, DD Brenna
2013 Fuzion 342 Monster
2009 Harley FLHX
2 Wieners Maddie and Mollie
|
|
|
01-02-2014, 08:19 AM
|
#3
|
Senior Member
Join Date: Aug 2013
Posts: 138
|
Quote:
Originally Posted by ctpd814
If you get on the tire manufacturers web sight, you can take the tire size and look up the diameter of tires the truck has on it now. You can also do this for the OEM tires. This will tell you if the tires are any taller. By the pictures, the tires look to be a lower profile than stock so they may be the same diameter or at least close. If the tires are close to the same diameter as the OEM tires, you should be fine. Remember the truck will squat a little when the trailer weight is added.
|
The manufacturers site says they are 33.2 in diameter...think stock is about 31.8 - so a two inch, or technically 1.4 inch difference. At the end of the day, this shouldn't make much difference should it?
|
|
|
01-02-2014, 08:54 AM
|
#4
|
Junior Member
Join Date: Dec 2013
Location: SC
Posts: 29
|
Since you have not purchased a hitch yet. I would look at a hitch that has some adjustment in it. I have a B&W that has vertical adjustment to allow for variations in bed height. There are other hitches that do the same. Ken
__________________
Ken & Gayle
2014 Fuzion 395
2012 F350 DRW 4X4
|
|
|
01-02-2014, 09:33 AM
|
#5
|
Senior Member
Join Date: Aug 2013
Posts: 138
|
B&W companion is my first choice which I think does have adjustments, and I'm told the fuzion hitch has 3 adjustments as well, so praying we can get it to work.
Dealer is asking their service manager for a ground to bed bottom range that will work with the fuzion as well, so hopefully we're in good shape.
|
|
|
01-02-2014, 09:53 AM
|
#6
|
Permanent User Ban
Join Date: Apr 2012
Location: CA
Posts: 83
|
I have a 342 and pull it with a 2008 Chevy dually with stock size 16" tires.. I have a Curt hitch that is adjusted all the way up. With the pin box on the trailer in the middle setting I only have 4" of clearance between the bed rails. I lowered the pin box and got my clearance to around 6-6.5". That was a little better, but now my trailer is a little nose high and the rear is a little lower so its not exactly sitting as level as I would like.
I will soon swap out the cheap tires on the trailer on put on some 235/85/16 and that might raise it back up a bit since they are a tad taller than the tires I have on there now. We will see. Having the dealer measure the trailer is nice, but the best way would be to hook up and see how much the truck squats and what the real measurements are.
|
|
|
01-02-2014, 10:11 AM
|
#7
|
Senior Member
Join Date: Aug 2013
Posts: 138
|
Any idea how far your fuzion is from overhang to ground when it's level?
I'm going to cross my fingers that they can get it right, or at least as close to yours and I can put bigger tires on it down the road.
|
|
|
01-02-2014, 10:38 AM
|
#8
|
Permanent User Ban
Join Date: Apr 2012
Location: CA
Posts: 83
|
Quote:
Originally Posted by sptddog
Any idea how far your fuzion is from overhang to ground when it's level?
|
No. It would not matter on mine, because if the trailer was level I would not have the necessary bed rail clearance. I have to run the trailer a little nose high to get the clearance I need. I also have air bags which I run at 45psi to keep me off the overloads, so that will change things a bit. Best to go down and hook up the the trailer and see how things shake out. Using a different 5th wheel hitch will change things also if it gives you more or less adjustment. I am going to be changing out my pin box here soon for a tri-glide, so it will be interesting to see how that is going to change things.
I can measure the bed rails on my dually as it currently sits with 5psi in the air bags and you can compare it to yours. If yours is higher you could have potential issues. Depends on if they changed the beds between 2008-12.
|
|
|
01-02-2014, 11:20 AM
|
#9
|
Senior Member
Join Date: Aug 2013
Posts: 138
|
That would be awesome if you don't mind doing that! One other measured (can't remmber if it was on this forum or duramax) and was at 55, and one was at 57. I'm right in that vicinity with my half measure I did this morning.
|
|
|
01-02-2014, 11:47 AM
|
#10
|
Permanent User Ban
Join Date: Apr 2012
Location: CA
Posts: 83
|
I am at 57.5" I measured from the bed rail to the ground between the rear of the dually fender and the rear bumper. Right by the taillight. That is with my 5th wheel hitch in the bed of the truck. I don't know how much it would go up if any at all when I take it out.
|
|
|
01-02-2014, 05:15 PM
|
#11
|
Junior Member
Join Date: Sep 2011
Location: MD
Posts: 11
|
i would rather have 19.5 tires. Those tires should have a higher weight rating than the factory tires. They should also last upwards of 60k miles before being replaced or retread.
|
|
|
01-02-2014, 05:18 PM
|
#12
|
Junior Member
Join Date: Sep 2011
Location: MD
Posts: 11
|
Also, after taking a closer look at the pictures the tires look like 22.5 tires/wheels. if that is the case, the smallest diameter 22.5 is around 34.5 inches in diameter.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|