Slides Work Intermittently - From In Command Or BCM
2017 Raptor, 44' Triple axel. Three slides, Main, Kitchen and Master.
Not original owner, we have owned it for about a year. No problems with unit when we bought it, was in great condition. Slides worked fine the few times we used them.
Spent the winter in Florida, 5 months in the same location. Packed up to head north April 1st and kitchen slide would not go in. Reset InCommand panel and slide went in.
Got home and put all 3 slides out, then attempted to put them in and Main slide worked, Kitchen would not go "in" from InCommand panel. I could hear the relay click in the motor, bump, bump, bump, when I pressed the InCommand panel "in" button, but no movement. The motor would engage, and i could hear the motor when i pressed "out"(but slide was all the way out). The Master bedroom slide, once all the way out, would go "in", but not "out" again, all from the InCommand panel. Reset BCM(killed power, waited, powered back up), same issue. Tried on shore power(plugged into an extension cord from the house, using a dogbone power cord plug adapter 15 amp male to 50 amp female locking connector), and tried on generator power, same issue.
Started to swap BCM square fuse thingys, but no luck.
Brand new Battery(Optima AGM) once we got back from FLA.
Any suggestions appreciated. TIA
|