|
|
08-02-2011, 07:13 PM
|
#1
|
Junior Member
Join Date: Nov 2010
Location: Colorado
Posts: 11
|
Bumper caps
Anyone have an issue with bumper caps that don't want to stay on? The caps on our 2011 Laredo 303TG seem to fit tight when I put them on/off to remove or store the sewer hose. In fact they can be difficult to get back on. But several times after a trip, I found they had worked loose and nearly fell off during travel. I ended up using an extra strap for tying down my kayak to run from one bumper cap to the other to keep them on.
__________________
2011 Laredo 303TG
2008 Ford F250 diesel
|
|
|
08-02-2011, 07:40 PM
|
#2
|
Site Team
Join Date: Mar 2009
Location: Fraser Valley BC Canada
Posts: 7,015
|
It's those darn sewer hose gremlins! Everybody's got them. They come out when you are travelling down the road, start pushing on the cap to work it loose so they can escape.
Some folks put a small, SS screw at the top of the end bumper and attach it to the cap with a nylon fishing line. Might work loose but it won't fly off.
__________________
2008 Cougar 5th Wheel 27RKS
2005 2500 GMC Duramax
|
|
|
08-02-2011, 07:42 PM
|
#3
|
Site Team
Join Date: Jun 2009
Location: Venice
Posts: 5,346
|
You really should find another place to store your sewer hose. The inside of the bumper will rust and wear holes in the hose. This can get costly and, or messy. Mount a piece of PVC pipe or a vinyl fence post somewhere and glue the bumper-caps on to the bumper. That's the only cure I have found for both problems. JM2¢, Hank
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|
|
|
08-03-2011, 02:54 AM
|
#4
|
Senior Member
Join Date: May 2010
Location: Rochester, NY
Posts: 1,605
|
I don't even bother with the bumper to store sewer hose on the rig I have now. I mounted 4" PVC pipe under the frame to hold hose. On my old trailer, had the same issue. I drilled holes through the bumper and caps, and used a 4.5" bolt with nut to hold the caps in place.
Steve
|
|
|
08-03-2011, 03:18 AM
|
#5
|
Senior Member
Join Date: May 2010
Location: Newport News, Va
Posts: 302
|
I have lost a few bumper caps. I just removed them. I don't store anything in there so no bigge
|
|
|
08-03-2011, 05:40 AM
|
#6
|
Senior Member
Join Date: Aug 2010
Location: Dacula, GA
Posts: 620
|
Bumper caps
I do not use the bumper for stowing. Simply use black electrical tape and issue resolved.
|
|
|
08-03-2011, 07:29 AM
|
#7
|
Senior Member
Join Date: May 2011
Location: Carnation, WA
Posts: 190
|
Locking Bumper Plugs
I replaced my caps with the following locking caps from Camping World:
http://www.campingworld.com/shopping...mper-plug/6902
They work great.
As for not storing your sewer hose in the bumper because it will cause the bumper to rust - yes that is true, but I think the bumper is going to rust anyway and I doubt it is going to rust thru and become visible during the life of the trailer.
As for causing holes in the sewer hose - I seriously doubt that. Besides,that is what duct tape is for!!
__________________
2011 Keystone Cougar 24RKS
2007 Cadillac Escalade
Prodigy P2 Brake Controller
Past Trailer:
Forest River R-POD RP-175
Past Tow Vehicle:
2008 Toyota Sienna
|
|
|
08-03-2011, 07:46 AM
|
#8
|
Senior Member
Join Date: Oct 2010
Location: Okanagan, BC
Posts: 916
|
I'm trying the same caps as above, but also clamped on a tube for a second, longer hose. This hose will see the most use with the other just being an extension.
Dad has drilled holes through the bumper and end cap and put a this tent stake through the hole to keep them in place. Works well as well.
__________________
2010 Cougar 30RKS
2015 GMC Sierra Max Trailer
"Drinks for 6, Dinner for 4, Sleeps 2"
|
|
|
08-03-2011, 07:49 AM
|
#9
|
Senior Member
Join Date: May 2010
Location: Newport News, Va
Posts: 302
|
Quote:
Originally Posted by gepaine
|
Buddy of mine has those, he also says they work great!
|
|
|
08-03-2011, 06:26 PM
|
#10
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,997
|
Camping World has a folding step ladder that is 3.5"x3.5" when folded. I was thinking about putting that in the bumper and putting a 6" x 1/4" clevis pin in each end (through the caps) to hold them in place. (Also to keep the ladder from flying out.)
As I remember, our first "sewerhose bumper" was in 1972. I lost several caps on that one and things haven't changed at all. So much for 40 years of improvement in design.... My 2011 has the same caps and essentially the same bumper. Maybe the paint is different????? Hmmmm gotta have something to attribute to "evolution" LOL
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
08-03-2011, 06:40 PM
|
#11
|
Senior Member
Join Date: May 2011
Location: Carnation, WA
Posts: 190
|
4" Square PVC Fence Post
JRTJH,
I have the ladder you mentioned - in the 5-foot version. I bought one 4" Square PVC Fence Post and 2 end caps from Home Depot, mounted them under the tongue frame (cross-wise), and I store the ladder there. Still use the bumper for the sewer hose. One advantage to this is the ladder (and consequently my clothes) doesn't get rust all over it.
__________________
2011 Keystone Cougar 24RKS
2007 Cadillac Escalade
Prodigy P2 Brake Controller
Past Trailer:
Forest River R-POD RP-175
Past Tow Vehicle:
2008 Toyota Sienna
|
|
|
08-03-2011, 07:04 PM
|
#12
|
Junior Member
Join Date: Nov 2010
Location: Colorado
Posts: 11
|
Appreciate the suggestions from everyone. I'll post the solution I end up employing.
__________________
2011 Laredo 303TG
2008 Ford F250 diesel
|
|
|
08-03-2011, 07:53 PM
|
#13
|
Member
Join Date: Jun 2010
Location: Ludington, Michigan
Posts: 31
|
Bumper caps
I also have the locking bumper plug they work great for me on my Cougar 318SAB, lost one of the ones that came with my rigg. DON
|
|
|
08-03-2011, 08:21 PM
|
#14
|
Senior Member
Join Date: Mar 2011
Location: Colorado Mountains
Posts: 422
|
I just drilled a hole all the way thru cap and bumper and drop a 8" screw in the hole. No way it can fall off now.
__________________
Chuck
Wonderful Wife
Australian Shepherd
2010 Ford Expedition TV
2010 Outback 230RS Toybox, 5390# UVW, 6800# Loaded
Not yet camped in Hawaii, 2 Canada Provinces, & 2 Territories
I can't be lost because I don't care where this lovely road is going
|
|
|
08-04-2011, 01:54 AM
|
#15
|
Senior Member
Join Date: Mar 2010
Posts: 452
|
I agree with the others about not storing your sewer hoses in the bumper, not so much for the rust but the inside of the bumper is rough and the bouncing of the hose within it wears out the hoses quickly.
Ron W.
|
|
|
08-04-2011, 06:31 AM
|
#16
|
Senior Member
Join Date: Nov 2010
Location: Herndon, VA
Posts: 394
|
Sewer hose
On a similar note, I purchased a Rhino Hose sewer hose colapses firmly and stays that was of it's own accord. I is very easy to wash and, once collapsed I store it in a plastic bag. No more bumper baloney .
John
|
|
|
08-22-2011, 12:57 PM
|
#17
|
Junior Member
Join Date: Aug 2011
Location: Neeses S.C.
Posts: 20
|
Quote:
Originally Posted by therink
I don't even bother with the bumper to store sewer hose on the rig I have now. I mounted 4" PVC pipe under the frame to hold hose. On my old trailer, had the same issue. I drilled holes through the bumper and caps, and used a 4.5" bolt with nut to hold the caps in place.
Steve
|
will the the sewer hose slide into the 4' pvc pipe with both of the ends on the sewer hose ?
|
|
|
08-22-2011, 01:38 PM
|
#18
|
Senior Member
Join Date: May 2010
Location: Rochester, NY
Posts: 1,605
|
Quote:
Originally Posted by woowoobubba
will the the sewer hose slide into the 4' pvc pipe with both of the ends on the sewer hose ?
|
Yes it fits well, including the adapter ends. I have a Rhinoflex hose. I dud have to trim off the 1/2" tabs off of the rv end fitting. I installed the 4" PVC pipe on the underside of the frame using galvanized plumbers straps. Drilled holes on the pipe so it vents/drains and convenient to access.
Steve
|
|
|
01-18-2014, 03:35 PM
|
#19
|
Junior Member
Join Date: Jan 2014
Location: Las Cruces, NM
Posts: 3
|
Easy (and permanent) Fix
I have found that if you will drill a hole through the bumper, the cap and out through the bumper, top to bottom, and then drop a long nail or other pin down through the hole, it never falls out again, and easily removes just by pulling the pin! The rubber of the cap provides enough friction to keep the pin in place over some really rough roads.
|
|
|
01-18-2014, 03:53 PM
|
#20
|
Senior Member
Join Date: Sep 2013
Location: Santa Rosa Beach, Fl
Posts: 150
|
I have a piece of 1/2in PVC pipe running thru my bumper with one end having the cap permanently attached to it. On the other end the cap slides over the PVC and a clevis pin holds it on. Been doing this for years and have never lost a cap since. It`s easy and cheap and you don`t have to drill thru anything but one end of the PVC pipe.
__________________
2013 Passport 32FB Ultra Lite Elite
`07 GMC 2500HD SLT
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|