tmac56, Howdy;
Quote:
Originally Posted by tmac56
have a corner shower and when I turn on the taps water sprays from where the shower head hose attaches to the faucet.
I have unscrewed the faucet from the shower wall but can hardly get my hands back behind the faucet to see if the supply lines are correctly attached.
Does anyone know if I have slack to work with and pull on those supply lines to possibly replace the faucet ?
|
From the sound of it it would appear that the anti-siphon valve has cracked.
It's the part between the hose and the body of the mixing unit (the
bit with the handles).
In my unit, a 2008 Cougar 278RKS, I can access the back side of mine (where the plumbing
connects), from the entertainment center. I would suggest that you create some sort of
capture system so that the water lines don't escape from the small access hole provided.
Draining the system will prevent getting things that don't need to be wet from getting that way.
The rest is kind of common sense stuff ... but if you need more help there are a lot of folks on
here that are more than willing to lend a hand.
By the way ... Welcome to the forum
Helps if you tell us which model you have there may be someone with the exact same model
that can give you specific info from an "I've been there" point of view.
Again,
hankaye
__________________
Striving for a less complicated life since 1949 ...
Home: 2008 Cougar 278 RKS
T.V.: 2004 F-250 4X4, Level III BulletProofed , Detroit Tru-Track Differential (915A550)
Dog: 2006 Border Collie (Rascal) aka Maximum fur dispersal unit. (08/04/2006 - 12/16/2017) RIP.