Changing Heat Thermostat to a different Zone

[FamilyFuzion2021]

Got a question. Is it possible or has anyone ever changed zones from where the heat thermostat reads from? Problem I have is that the bedroom (in 5th wheel) gets about 5 degrees hotter than the rest of the camper before the heat cuts off. I know I can compensate by lowering temp in main living but this was just a thought. It's a 2021 Fuzion 428 with incomand system.

What problems would this cause? I know I would like to keep th ACs the same so I'm not sure how to separate the heat and AC from different zones. Could the incomand be reprogrammed?

[ChuckS]

You would have to locate the two blue signal wires on Zone 1 roof A/C control board.. these are the On/Off signal source sent down to the furnace control module to tell furnace to be on or off

You would then need to RELOCATE those two blue signal wires to the Zone 2 roof A/C control board

Then you would need to reinitialize the CANBUS so the system knows what device is where...

ALso since this is an In Command system the floorplan isn't going to be correct to show the furnace on the correct Zone.

And it just isn't worth the time ... IMO

[FamilyFuzion2021]

Thank you for that info. Definitely not worth the hassle to do all that. Thanks for your time