Ok,
I have been all over the internet for the past 2 hours looking for the answer to this one. Here's the question I have.
I recently purchased a used 2012 Springdale 275FL from a fella. My first time taking it out this past weekend. Didn't think of testing to see which valve was for which tank BEFORE HAND.
NOW, I have the grey water tank full and I'm sure the black water is pretty close to being full as well.
So, I go to the inspect the situation under the trailer,....This trailer has the upgraded under covering and added insulation feature on it,...that's really nice but you can't trace out the drain pipes to see where each is coming from.! Of course as you all know, both handles are black and there is no indication on which is which in terms of grey water or black water. I can say that the forward pipe actually has a smaller pipe "T'ed" into it near the end and that smaller pipe has a separate handle on it. The pipe to the rear has just the single handle on it. Both main pipes are the same size FYI.
I'm wondering if someone else on here may have the same model and year trailer and could help me out with a quick answer. Or if maybe someone may be able to point me in the right direction to get the answer or figure it out????? I find it hard to believe that they don't have this documented? The "owner's manual" is totally generic to cover "all" the models. Lazy if you ask me. Whatever,.. I guess.
Any assistance/help on this is truly appreciated everyone. I really don't want to guess at this, obviously!