|
|
03-27-2021, 03:10 PM
|
#901
|
Member
Join Date: Dec 2019
Location: Surrey
Posts: 93
|
It has been a busy month with the trailer. We upgraded the suspension with Morryde wet bolts and CRE2-1000 equalizer and new Carlisle “D” rated tires.
Added a 80W solar panel system for charging the battery when boondocking.
This weekend entailed:
Getting on the roof and installing the Micro-air easy start on the AC. All wired in and trained. Works like a charm with the 2200 genny now.
Next on the list while on the roof was to inspect, clean and fill any voids that looked like it could be a problem.
Still while on the roof, installed the Max-air II vent covers. No more rain inside the vents.
Further down the list was to insulate the pass through to help with the cold weather camping.
Among other little things like putting up coat hooks, USB ports, propane tank monitors, sealing slam hatches, and organizing every thing..
After five months in the hands of Keystone (missing an entire camping season last year) for the floor replacement, I was happy to finally put all the goodies that I acquired on.
__________________
2018 Premier Bullet 22RBPR
2011 GMC 3500HD 6.6 Durmax
|
|
|
03-27-2021, 05:11 PM
|
#902
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
Quote:
Originally Posted by Summergirl
It has been a busy month with the trailer. We upgraded the suspension with Morryde wet bolts and CRE2-1000 equalizer and new Carlisle “D” rated tires.
Added a 80W solar panel system for charging the battery when boondocking.
This weekend entailed:
Getting on the roof and installing the Micro-air easy start on the AC. All wired in and trained. Works like a charm with the 2200 genny now.
Next on the list while on the roof was to inspect, clean and fill any voids that looked like it could be a problem.
Still while on the roof, installed the Max-air II vent covers. No more rain inside the vents.
Further down the list was to insulate the pass through to help with the cold weather camping.
Among other little things like putting up coat hooks, USB ports, propane tank monitors, sealing slam hatches, and organizing every thing..
After five months in the hands of Keystone (missing an entire camping season last year) for the floor replacement, I was happy to finally put all the goodies that I acquired on.
|
That's lots of "mods to make it nicer" but remember that every pound you add is one more pound to pull down the road and one more pound on the frame, springs and hitch... These things are "engineered to be built with the lowest bid components"... think through the mods, not as you would to make a S&B better, but as you would to keep a kite in the air without snapping the string.....
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
03-28-2021, 06:40 PM
|
#903
|
Junior Member
Join Date: Oct 2020
Location: Wausau
Posts: 17
|
This a New to me 2015 Outback 230trs... (October 2020]
Friday, New Goodyear Endurance Tires including spare! The Manager at Discount Tires made me a smokin deal!
Yesterday, I got rid of that “Piece of CRAP MATTRESS” and ordered a new mattress from Mattress Insider. Needed a RV King Short... they are hard to find! Ordered the Hypervent, mattress cover and a set of sheets to boot! ( as the sayin goes...”if Mama ain’t Happy ain’t Nobody Happy”!)
Today, I started on a Stinky Slinky and stuff holder w/ slide out tray! (Hoping next weekend I’ll be able to paint and find a place to mount)
I’ve also:
- changed all interior lights to LED
- reattached the Plastic sheeting below the Slideout bed.
- installed a “extend a shower” rod
- installed a 48” x 48” ramp extension
- foil taped in and around all the AC vents and AC intake and outflow... unbelievable the shoddy craftsmanship! The flow should be way better now!
- Outdoor Kitchen - new faucet and a new burner set ( the original burners were so corroded from the leaky faucet they didn’t work... eBay drop in exact replacement sooo cheap!)
- a million little piddly things
Next week, a window gets pulled and resealed! (I’m having a Keystone dealer do this) I have some slight delamination happening and I want to make sure it’s good!
When it gets warm enough:
- I have a MaxAir fan to install and a Max Vent to install! Haven’t decided which vent gets what!
- I have to add a wheel chock for my Harley and some additional tie down rings
- go over the whole thing and caulk the bad areas ( I ordered ProFlex)
- replace the black insert trim molding on the front and 1 side
Considering:
- adding an outdoor shower on the back... (mainly for our 2 Golden Retrievers) there is a place next to the water heater so it would be easy to plumb!
- back up camera
|
|
|
03-28-2021, 08:08 PM
|
#904
|
Senior Member
Join Date: Sep 2020
Location: Hot Springs
Posts: 156
|
I'm beat. The last two days have been busy busy busy. I got my truck back from the dealers service center Friday afternoon. Saturday I got it washed and cleaned up it really needed it. Took a load of trash to the dump then started working on the trailer. Removed the cargo tray from the back since our first trip out in about 2 weeks we will have full hook ups. Checked the propane tanks fill level, all good to go there, I have 1 full and 1 about 2/3. Got out the materials I purchased to build my own sewer hose carrier and discovered my hose fittings will not fit in the tube. Returned those to the building supply store and got out my Tire Minder intending to install and set it up. Re-read the box and uh-oh. This unit is for 70 PSI max tires, my Cougar has 80 PSI tires. I came inside and checked, the return window had closed so I can't send it back. Offered it up to some folks on various Facebook pages and it sold inside of 15 minutes. Surfed Amazon and ordered the correct Tire minder and a sewer hose carrier I can add. Downloaded and set up the iN Command app on my phone and made sure it all works. I tested all the systems except the water heater, it's still bypassed. Furnace, fridge, AC, stove everything works. Check tire pressure in all tires including the spare, all of them were low by at least 15 PSI. Got up this morning and started on the water system. Filled the water tank with water and a bleach water solution. Ran each faucet for about 2 minutes until I smelled bleach. Let everything sit for about 4 hours. Wife and I added some cargo organizers under the bed, replaced the bedspread that came with the trailer, added a mattress pad, removed a few sleeping bags we had under the bed. Added some organizers in the pantry cabinets, took out a bunch of DVD's we've watched more than a few times. Since I'm retiring from Napa on Wednesday, I made my homemade chicken parm for all the guys and their wives, I'll take that in to work tomorrow. After supper, I went back out and drained the fresh water tank, refilled it with fresh water and ran each tap again for 2 minutes to flush all the bleach solution from the lines. Opened the low point drains, the fresh water tank drain, and when they were done running water, closed the tank drain. I then drained the grey water tanks and put everything away. We're getting there, we will be pulling out on the 15th headed for Vegas!
__________________
USAF Retired
2018 Ram 2500HD Laramie CTD
2021 Cougar Half Ton 27SABWE
|
|
|
04-16-2021, 03:48 PM
|
#905
|
Junior Member
Join Date: Oct 2020
Location: Strathroy
Posts: 9
|
I installed the morryde cre system and wet bolts,
A pro pride hitch, oxygenics shower head, back up camera, WoBLR level, tire pressure monitors. A new mattress and a bills RVQ bumper bbq mount.
__________________
[/SIGPIC][/SIGPIC]
2020 Ram Limited
2020 Premier 26RBPR
|
|
|
04-17-2021, 01:27 PM
|
#906
|
Senior Member
Join Date: May 2015
Location: Rockett, TX
Posts: 481
|
Had the disc brakes installed
__________________
Jerry & Debbie
with Fur Babies Sasha & Sam
2018 Alpine 3401RS
2019 Ford F350 SRW
|
|
|
04-17-2021, 02:19 PM
|
#907
|
Senior Member
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
|
Quote:
Originally Posted by Old Mustanger
Had the disc brakes installed
|
You won't regret that upgrade!
Best $$ I spent on my last 5er......
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
|
|
|
04-17-2021, 03:43 PM
|
#908
|
Senior Member
Join Date: Feb 2021
Location: Des Moines
Posts: 149
|
What did you do to your RV today?
Quote:
Originally Posted by Old Mustanger
Had the disc brakes installed
|
What is the approximate cost to have this done?
__________________
2021 Keystone Montana High Country 383th
2021 Ram 3500 long bed
|
|
|
04-17-2021, 07:17 PM
|
#909
|
Senior Member
Join Date: May 2015
Location: Rockett, TX
Posts: 481
|
Quote:
Originally Posted by BigBobIa
What is the approximate cost to have this done?
|
parts were $2559 (included upgrade to 9/16" studs), installation was $1000. We had to decide that we are going to keep this trailer to make this expenditure.
__________________
Jerry & Debbie
with Fur Babies Sasha & Sam
2018 Alpine 3401RS
2019 Ford F350 SRW
|
|
|
04-19-2021, 06:21 PM
|
#910
|
Senior Member
Join Date: Sep 2020
Location: Hot Springs
Posts: 156
|
Towed it home from our long camping weekend in Las Vegas. 523 miles in a little over 10 hours. I'm now sitting in my chair that moves at zero miles per hour with a tasty cold adult beverage. I'll take care of unloading food and dirty clothes and cleaning up the trailer tomorrow.
__________________
USAF Retired
2018 Ram 2500HD Laramie CTD
2021 Cougar Half Ton 27SABWE
|
|
|
04-21-2021, 04:35 AM
|
#911
|
Senior Member
Join Date: Mar 2012
Location: South Texas
Posts: 343
|
Tires
[QUOTE=E Rod;282570]Part ll
5. Removed the Provider brand tires and had Discount Tire install the new Sailun tires.
E Rod: I'm curious as to why you removed the Provider tires and replaced them. I presently have the Provider tires (G rated) and have had excellent service. My research indicated these tires for heavy RV's are about as good as you can get. Have you had a problem with them? I'll be replacing tires in about a year and considered to stick with Providers. Now you got me thinking, which is dangerous for old folks.
__________________
Sandy & Ann
2019 Alpine 3401RS
2011 Ford F350 Diesel
|
|
|
04-26-2021, 11:02 PM
|
#912
|
Senior Member
Join Date: Feb 2019
Location: Wickenburg
Posts: 3,314
|
In the 26RBSWE, there are some really handy shelves hidden behind the TV. Problem is, it's dark as sin back there, so it's tough finding things stored in the fabric bins. For Christmas 2019, one of my boys got me some raw LED strips so I could add some lighting. Great, now I just had to figure out how!
When I got this rig, the (adjoining) pantry had three sections, except that the middle one was blocked off. My Mistress of the Pantry informed me that This Shall Not Stand, so I explored. There was a minor rats' nest of AC, DC, and TV wiring strung across the compartment, feeding three intruding wall sockets... but I found there was so much slack in the wiring (which I have found to be true in general in this rig, thank you, Keystone!) that I had no problem routing it along the rear wall with some wire loom, and burying everything (even the wall box backs) behind a false partition, to give DW 50% more pantry space. So I already knew I had a handy "power center" available for this upgrade. (I highly recommend this easy upgrade to any other owner of a "crippled" pantry.)
I invested in (what I thought was) the same model dimmer switch Keystone put in the slide, some metal channels, HD glue strip ("ceiling" mounts are demanding), long pigtails, and surface-mount wire guides. It took me until this weekend to psych myself up to tackle the job. Removing the TV was a two-person job, but a lot easier than I thought it would be (basically one pivot bolt).
The electrical assembly was way less challenging than the physical, thank heavens. While I was in there with tools, I installed a pass-thru to the upper cabinets for an extension cord, so I could power my WiFi rig and the battery chargers for my cordless tools, which live up there.
The finished product is very pleasing, illumination-wise. It wasn't originally my plan to use it for mood lighting or "TV bias" lighting, but those options appeal to me now.
My only problem (that I quickly discovered) is that the dimmer switch (I suspect) throws quite a hum into the Furrion audio unit, whether I am listening to radio or routing the TV audio to the ceiling speakers. I'm wondering why the apparently identical dimmer on the slide doesn't do this. I suspect that despite the identical casing and operation, the dimmer I bought may have lower quality internals. I'm researching this; meanwhile, I'll just have to turn the lights off when I'm using the audio system.
__________________
2019 Cougar 26RBSWE
2019 Ford F-250
|
|
|
04-27-2021, 09:24 AM
|
#913
|
Senior Member
Join Date: Jul 2019
Location: Richmond
Posts: 625
|
Nice mod! Wondering... was your tv always mounted on that center column and not tucked into that space? Mine on the Passport is inside that area and there isn't a center beam at all...tv swings out to site level with the outside framing of the cabinet... Our pantry is huge inside and pretty wide so there really isn't a lot of space where the TV sits... but I like how you made that much more useful as storage...
__________________
Tim & Hope
2020 Passport 2600BH GT
2019 Ram 1500 Quad Cab
|
|
|
04-27-2021, 07:09 PM
|
#914
|
Senior Member
Join Date: Feb 2019
Location: Wickenburg
Posts: 3,314
|
There's a heavy metal mount on the center column that you can sort of see in the photo. (I never noticed until I went to reassemble the arm, that the column itself is actually off center, the swivel bolt on the left side of the big plate is centered.) When stored for travel, the TV is roughly even with the cabinet surface, but the elbowed arm allows it to be pulled out into the room, and swiveled so you can watch from the dinette or even the throne. Mostly we pull it out only to access the shelving behind.
There's a you-wander interactive tour of this floorplan here.
__________________
2019 Cougar 26RBSWE
2019 Ford F-250
|
|
|
04-28-2021, 10:15 AM
|
#915
|
Senior Member
Join Date: Jul 2019
Location: Richmond
Posts: 625
|
Thanks for the link and quick response.. very similar floor plan to mine but some nice touches... Thanks again
__________________
Tim & Hope
2020 Passport 2600BH GT
2019 Ram 1500 Quad Cab
|
|
|
05-03-2021, 02:38 PM
|
#916
|
Senior Member
Join Date: Jul 2019
Location: Richmond
Posts: 625
|
Got the girl uncovered, flushed and sanitized water tank and lines, got heater plug back in, installed a stink hose holder to get the hose out of the bumper. Measured my speakers for replacements, installed some extra hooks and hangers, put a wire rack on the inside of the pantry door at the wife's request and generally got it almost ready to go camping May 14th...Oh and installed a new 10" multi layer gel foam mattress to replace the 4" POS that came with the trailer.
__________________
Tim & Hope
2020 Passport 2600BH GT
2019 Ram 1500 Quad Cab
|
|
|
05-03-2021, 02:48 PM
|
#917
|
Senior Member
Join Date: Sep 2020
Location: Jacksonville
Posts: 993
|
Getting ready to install my TPMS
__________________
Bob/Kay
Jacksonville, Nc
2020 Keystone Cougar 5th wheel 29 rks traded now
2021 3761 fl Montana 5th wheel
Pulled with a 2022 F350 King Ranch
Retired LEO after 35 years just enjoying life now.
|
|
|
05-03-2021, 04:59 PM
|
#918
|
Senior Member
Join Date: Oct 2016
Location: "Murvil, TN
Posts: 2,212
|
I ordered one of these today.....WiFi and Bluetooth 12V RV thermostat. This will open up so many possibilities, primarily remote control of the 15K A/C-Heat Pump and being able to monitor the inside temperature for our dog while we are not at the trailer.... https://www.hutchmountain.com/produc...-rv-thermostat
__________________
2016 F350 King Ranch Crew Cab Dually Diesel 4x4
2018 Grand Design Momentum 394M
2023 Suzuki GSX-S1000GT+
Excessive payload capacity is a wonderful thing
"If it ain't Fast....It ain't Fun"
|
|
|
05-03-2021, 05:37 PM
|
#919
|
Senior Member
Join Date: Oct 2019
Location: Central FL
Posts: 1,089
|
Quote:
Originally Posted by Sarge2
Got the girl uncovered, flushed and sanitized water tank and lines, got heater plug back in, installed a stink hose holder to get the hose out of the bumper. Measured my speakers for replacements, installed some extra hooks and hangers, put a wire rack on the inside of the pantry door at the wife's request and generally got it almost ready to go camping May 14th...Oh and installed a new 10" multi layer gel foam mattress to replace the 4" POS that came with the trailer.
|
Please post a link on your new mattress - we’re in the market for one.
|
|
|
05-03-2021, 06:45 PM
|
#920
|
Senior Member
Join Date: Jul 2019
Location: Richmond
Posts: 625
|
Can't figure out why I can't add just the link...
Amazon..
LUCID 10 Inch Memory Foam Firm Feel – Gel Infusion – Hypoallergenic Bamboo Charcoal – Breathable Cover Bed Mattress Conventional, Queen
__________________
Tim & Hope
2020 Passport 2600BH GT
2019 Ram 1500 Quad Cab
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|