|
09-30-2011, 11:55 AM
|
#1
|
Member
Join Date: Sep 2011
Location: Inverness
Posts: 74
|
Any Other Laredo 310RE Owners
Bought the 2011 Laredo 310RE about two weeks ago. Any other Laredo owners out there with the same unit????
__________________
2017 Cougar 26RLS Fifth Wheel
2017 GMC 2500HD Crew Cab Duramax Diesel 4x4
|
|
|
09-17-2012, 11:00 AM
|
#2
|
Junior Member
Join Date: Sep 2012
Location: Illinois
Posts: 1
|
We have a 2011 310RE. Bought it in July of 2010. So far very pleased. My grandkids like the roominess of the living room area. Had a 29RL before this one. My wife says, it is so much easier to make the bed on this 310 than the 29RL. Probably my only complaint would be, the black tank valve is difficult to open and close. The other 2 valves work great.
|
|
|
10-29-2012, 04:09 AM
|
#3
|
Junior Member
Join Date: Oct 2012
Location: Cambridge ON
Posts: 7
|
Bought our 310RE in Oct 2010. So far been to Florida, Plymouth, Virginia Beach and around Southern Ontario. No problems so far. Heading back down to Florida in Dec once I get back from overseas.
__________________
2012 GMC Sierra 2500 HD Duramax
2011 Laredo 310RE
|
|
|
10-29-2012, 12:33 PM
|
#4
|
Senior Member
Join Date: Aug 2011
Location: Spokane, Washington
Posts: 368
|
We bought ours in Aug. of 2011 and really like all the room and storage.
Have over 12K miles on it so far and loading up for AZ now to leave after Christmas. We removed the two chairs and replaced them with one comphy
big easy chair and a small table. We really like all the storage. No major problems so far like the FR model we traded in for this.
Happy Camping
I found this pic of the new chair that relaced the original two. Hope it comes thru.
|
|
|
10-30-2012, 05:51 PM
|
#5
|
Senior Member
Join Date: Aug 2011
Location: Spokane, Washington
Posts: 368
|
Does anyone have trouble with the hot water facuets squeeking when you turn them on? Mine do and it seems it comes from the inside just below the handle. They are not serviceable and no parts are available that I have found. I just wondered if someone may have found a solution.
|
|
|
10-31-2012, 08:38 AM
|
#6
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,998
|
Quote:
Originally Posted by Bluewater
Does anyone have trouble with the hot water facuets squeeking when you turn them on? Mine do and it seems it comes from the inside just below the handle. They are not serviceable and no parts are available that I have found. I just wondered if someone may have found a solution.
|
It's probably the o-rings on the ceramic discs "squeeking" as they slip inside the faucet cutoff valve. If it "gets to you" and you can't manage to listen any longer, you can remove the faucet, turn it upside down and spray the water inlet port with silicone, operate the faucet handles a few times, leave the faucet upside down for an hour or so to help the silicone flow toward the "innards" of the valves, operate the handles a few more times and then reinstall. All should be better now.
What happens is the faucet o-rings are dry, supposedly lubricated by water with use, but sometimes the o-rings don't "leak" water around themselves and they stay dry causing them to "squeek". The silicone should stop your "squeeks".
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
11-02-2012, 08:55 AM
|
#7
|
Senior Member
Join Date: Aug 2011
Location: Spokane, Washington
Posts: 368
|
Thanks, that sounds like a great idea. I will give it a try and get back to you.
|
|
|
11-03-2012, 12:42 PM
|
#8
|
Senior Member
Join Date: Aug 2011
Location: Spokane, Washington
Posts: 368
|
AL-KO axles
I discovered something a while back that some of you may want to know. While trying to adjust the brakes on my 310RE I found they were not adjustable. So I contacted the AL-KO factory because I could not find any info in the owners manual about self adjusting brakes. After some research and giving them the part number off the axle they confirmed that my 6000 # 8 lug axle does have self adjusting (forward) brakes. I have attached the parts breakdown in pdf form they sent me. This takes a lot of stress off us worring if the brakes need adjusting. Hope this will help someone.
|
|
|
11-07-2012, 01:49 AM
|
#9
|
Junior Member
Join Date: Oct 2012
Location: Cambridge ON
Posts: 7
|
That is good to know however, I don’t think your attachment came through.
__________________
2012 GMC Sierra 2500 HD Duramax
2011 Laredo 310RE
|
|
|
11-07-2012, 09:54 AM
|
#10
|
Senior Member
Join Date: Aug 2011
Location: Spokane, Washington
Posts: 368
|
The forum said it was too large to send. Guess I could email it if you want?
|
|
|
11-08-2012, 01:00 AM
|
#11
|
Junior Member
Join Date: Oct 2012
Location: Cambridge ON
Posts: 7
|
No, that won’t be necessary. Thanks anyways.
__________________
2012 GMC Sierra 2500 HD Duramax
2011 Laredo 310RE
|
|
|
10-18-2014, 05:40 AM
|
#12
|
Junior Member
Join Date: Nov 2013
Location: Titusville, FL
Posts: 1
|
Auto Brake Adjustment
Quote:
Originally Posted by Bluewater
The forum said it was too large to send. Guess I could email it if you want?
|
If you still have it, could you either send it to my email or my address? They are:
Thanks. - Jerry -
Jerry, do not include personal info on open forum ... use PM for your own safety. Hank (moderator)
|
|
|
10-24-2014, 05:44 AM
|
#13
|
Senior Member
Join Date: Jan 2011
Location: Arvada, CO
Posts: 709
|
Did you try zipping the pdf doc to see if it will go small enough to attach?
__________________
2010 Laredo 245RL
2007 Dodge Ram 2500 CTD 4x4
Andersen Ultimate Gooseneck mount
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|