Slide-out cable pulley questions
Had an issue this morning with one slide-out. It appears that the bracket for the IN cable and the bracket for the OUT cables might have hooked together and then banged free. Got that all squared away BUT in looking at the cables and brackets I see one cable that was quite slack. The bracket has adjusting nuts to apply or reduce tension.
Is it safe to assume that the cable should be moderately tight and that the adjustments should be roughly equal on both the top and bottom of the bracket?
Thanks in advance.
__________________
Jim
2018 Cougar 32RLI
Hercules H-901 tires
CRE3000 w/wet bolts
2021 F-350 4x4 7.3L Godzilla Crew Cab
|