Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Travel Trailers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 01-28-2018, 07:02 PM   #41
Hodgy
Senior Member
 
Hodgy's Avatar
 
Join Date: Nov 2017
Location: Bragg Creek
Posts: 636
Quote:
Originally Posted by chuckster57 View Post
Better not! 3 wires:

Hot
Neutral
Ground

I know that is what it is supposed to look like. I thought I saw in one post that some CG's had hinky wiring.

.
__________________
2016 Bullet 1800RB, UVW 3260, led by a 2005 Chev Silverado Z-71 1500, Crew Cab, 5.3L, 4WD, Tow & Off Road Package with 4.10 Rear Axle, GVR 7000 lbs, Front GWAR 3925 lbs & Rear GWAR 4000 lbs., Payload 1600 lbs., Hellwig 6012 Air Bags. 97' Honda Goldwing GL1500.
Home Base is the Alberta Foothills at 4300 ' ASL.
Hodgy is offline   Reply With Quote
Old 01-28-2018, 07:18 PM   #42
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,235
That’s why I have a surge protector. Mine is hard wired, and with remote display, I can monitor my power while comfortably inside.
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 01-28-2018, 10:17 PM   #43
xrated
Senior Member
 
xrated's Avatar
 
Join Date: Oct 2016
Location: "Murvil, TN
Posts: 2,198
Quote:
Originally Posted by bobbecky View Post
The Progressive unit, and we have the 50 amp hardwired one, does not monitor phase to phase voltage, only phase to ground and phase to neutral. It will work with either a 50 amp four wire source or a 30 amp three wire source equally well. It doesn't care how you get your 120 volt legs, whether they are two different legs like a normal 50 amp source or the same 120 volt leg, normally what you would have hooked up to a 30 amp source and with a 30 amp to 50 amp dogbone adapter. Because it doesn't look at the phase to phase voltage, it doesn't see 240 volts, 208 volts, or in the case of a 30 amp source split to feed both hotlegs of a 50 amp trailer, it would see 0 volts, because there is no voltage difference between two like legs. The accidental 240 volts it monitors is when an outlet, whether it is a 30 amp or a 50 amp, has a hot leg and neutral or ground in the wrong place, or as we have seen before when an electrician wires a 30 amp outlet like a dryer outlet with two hotlegs instead of just one 30 amp leg and everything in the rig burns up from 240 volt instead of 120 volts. If you look at the Error Code Chart in the Progressive manual, none of the error codes say anything about phase to phase voltages, only Line 1 Low or High Voltage or Line 2 Low or High Voltage. Hopefully, this answers any questions about what voltages are acceptable in these rigs. And, the photo that I posted earlier in this thread of the label that talks about 208 or 240 volts is what Keystone applied to our trailer below the shore cable connector where the 50 amp shore cable plugs into, and we have been in parks with 208 volts and everything worked as it was supposed to.
Thank you for that explanation and confirmation of what I had stated earlier that I believed. Hopefully, that should clear it up for everyone....myself included.
__________________
2016 F350 King Ranch Crew Cab Dually Diesel 4x4
2018 Grand Design Momentum 394M
2023 Suzuki GSX-S1000GT+
Excessive payload capacity is a wonderful thing

"If it ain't Fast....It ain't Fun"
xrated is online now   Reply With Quote
Old 01-29-2018, 12:05 PM   #44
xrated
Senior Member
 
xrated's Avatar
 
Join Date: Oct 2016
Location: "Murvil, TN
Posts: 2,198
Quote:
Originally Posted by bobbecky View Post
The Progressive unit, and we have the 50 amp hardwired one, does not monitor phase to phase voltage, only phase to ground and phase to neutral. It will work with either a 50 amp four wire source or a 30 amp three wire source equally well. It doesn't care how you get your 120 volt legs, whether they are two different legs like a normal 50 amp source or the same 120 volt leg, normally what you would have hooked up to a 30 amp source and with a 30 amp to 50 amp dogbone adapter. Because it doesn't look at the phase to phase voltage, it doesn't see 240 volts, 208 volts, or in the case of a 30 amp source split to feed both hotlegs of a 50 amp trailer, it would see 0 volts, because there is no voltage difference between two like legs. The accidental 240 volts it monitors is when an outlet, whether it is a 30 amp or a 50 amp, has a hot leg and neutral or ground in the wrong place, or as we have seen before when an electrician wires a 30 amp outlet like a dryer outlet with two hotlegs instead of just one 30 amp leg and everything in the rig burns up from 240 volt instead of 120 volts. If you look at the Error Code Chart in the Progressive manual, none of the error codes say anything about phase to phase voltages, only Line 1 Low or High Voltage or Line 2 Low or High Voltage. Hopefully, this answers any questions about what voltages are acceptable in these rigs. And, the photo that I posted earlier in this thread of the label that talks about 208 or 240 volts is what Keystone applied to our trailer below the shore cable connector where the 50 amp shore cable plugs into, and we have been in parks with 208 volts and everything worked as it was supposed to.
Update...... This was confirmed by a tech. at progressive Industries for me today. So the bottom line is that if you happen into an RV park that is using a 3 phase, 208V Wye connected transformer to feed the pedestals, and is hooked up correctly, your P.I. brand 50 amp E.M.S. system WILL operate correctly and offer full protection of your trailer. That type of system provides 120 volts between a hot and neutral. It would be wired so that there are 2 of the 3 hot legs coming to the receptacle that you plug your camper into ( just like a single phase center-tapped transformer like at your house) and of course the neutral and ground being there too.
__________________
2016 F350 King Ranch Crew Cab Dually Diesel 4x4
2018 Grand Design Momentum 394M
2023 Suzuki GSX-S1000GT+
Excessive payload capacity is a wonderful thing

"If it ain't Fast....It ain't Fun"
xrated is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 01:02 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.