Quote:
Originally Posted by LewisB
For me, that's part of the problem. It seems to be bolted down with no "apparent" ability to loosen. Nor is any of the wiring immediately apparent or available. Someone suggested that I have to recline both sides, then crawl UNDER the recliner to reach bolts that go into the slide out floor. That's the point at which this project got pushed down to the bottom of my "to-do" list. (ha-ha) If I can get the thing unbolted and turned over, I won't have any problems figuring out how to fix it. And considering modifications for additional storage as well.
Maybe next week...
|
Most likely there are 2 squarehead screws through the front framework into the floor. In a few cases I’ve seen them in the framework going front to back. A flashlight is your best friend, ask me how I know.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|