Rear bed

[Kimhairartist]

We have the carbon 22’ toy hauler. There are 2 couches that fold up flat while hauling your toy but when I fold it down, is it supposed to make one big bed or 2 small ones. I can’t imagine it supposed to be these two very small beds. The owners manual is no help.

[dutchmensport]

Welcome to the forums. With every camper, regardless of make, model, year, new, or used, there is always a learning curve. Is this your camper or are you looking to purchase this one? You haven't provided much information.

What year and model number are you referring to.

I found 2 videos on YouTube, one for a 2015 22 foot and one for a 2017 22 foot Carbon bumper pull. Both show the rear couches in the reclined position with a gap between them. The 2015 model video showed it came with an insert that went between them to fill that gap to make a full bed completely across.

[sourdough]

If you go to the user CP in the upper left corner and fill in the year, make and model of your trailer along with the tow vehicle questions can be answered with some relevance. Without no one has any idea what you have.

[Kimhairartist]

It’s the 2017 bumper pull.

[Essvar]

Typically the backrest portion of the couch will pivot and lay flat in front of the seat, creating one queen sized bed.

[Kimhairartist]

Our rv has a couch on both sides in the garage section. When you lower them to a flat position, there is a gap and I have tried to pull them together to make a bed but haven’t figured it out yet

[chuckster57]

On some models you can pull the couch out. It may require a little bit of lifting.

[Kimhairartist]

Thank you, yes both couches pull out to a flat bed but they have a gap between. I’m going to have to modify to make it a bed that’s usable for an adult

[spicercars]

Hope you can make it work. Welcome from northern MN.

[chuckster57]

Originally Posted by Kimhairartist

Thank you, yes both couches pull out to a flat bed but they have a gap between. I’m going to have to modify to make it a bed that’s usable for an adult

The seat portion might pivot in/out on the mount. I have seen that on some models, it’s been a few years so I don’t remember if you have to remove a pin or lift the seat up.