|
05-07-2022, 08:51 AM
|
#1
|
Junior Member
Join Date: May 2022
Location: PEORIA
Posts: 20
|
Fuzion Sofa Slide Seal
2021 Keystone Fuzion Sofa Slide Out seal replacement. It is the inside wiper type seal. Keystone can only say "well it is one of these 3." None of them look like the one that is torn. What is the part number or what seal do i need?
Also any recommendations as to How to replace is greatly appreciated.
Pictures are from the top looking down of the torn seal.
Also the next three are the ones Keystone says it is but none look correct.
|
|
|
05-07-2022, 09:02 AM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,317
|
You can try here:
https://approducts.net/product-categ...egories/seals/
Match the profile, make sure you measure the width.
Your pics are almost too close up to tell, can you post one from about 2 feet away? What type of slide mechanism is it? And it might be covered by warranty.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
05-07-2022, 04:20 PM
|
#3
|
Junior Member
Join Date: May 2022
Location: PEORIA
Posts: 20
|
Unfortunately as just outside of a year, no warranty.
Hard to get a different photo because of the location. Already standing on the counter. Get farther away and the slide blocks it but will try.
Will be a few days. Probably Tuesday.
I sincerely appreciate the response
|
|
|
05-08-2022, 06:30 AM
|
#4
|
Senior Member
Join Date: May 2016
Location: South Jordan, Utah
Posts: 2,222
|
Our slide wiper seals failed as well. Here is an option from Steele Rubber Products that is an improvement over the OEM seal that worked for us. Not sure from your photo if this is the same part as ours but definitely the same problem.
https://www.steelerubber.com/search?q=70-4184-265
Replacement is fairly easy. I used a flat screwdriver to open the channel at the top then pulled the old seal out from the bottom. Inserted the new seal at the top and just worked it down by pulling it a bit at a time. A second pair of hands is useful to help feed the new seal from the top. Finished up by pinching the channel back at the top.
__________________
2017 Cougar 279RKSWE
2007.5 Dodge Ram 2500 6.7 Cummins
Retirement Training Completed
I think the little voices in my head have started a chat group.
|
|
|
05-08-2022, 06:45 AM
|
#5
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,317
|
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
05-08-2022, 06:48 AM
|
#6
|
Junior Member
Join Date: May 2022
Location: PEORIA
Posts: 20
|
Canonman
Unfortunately on your site, 2019 is the newest one can select when trying to put in year make, manufacturer, model amd such. However, the slide seal you recommend seems to be the closest to matching up from anything else i have seen.
Thanks so much for the reply.
Will try to get different photos today.
|
|
|
05-08-2022, 07:08 AM
|
#7
|
Junior Member
Join Date: May 2022
Location: PEORIA
Posts: 20
|
Hey Chuckster
Thanks. It is a cable slide. Hmm
Thanks again. All y'all have been waaaaay more helpful than Keystone and the dealer here. Thanks again
|
|
|
05-08-2022, 06:06 PM
|
#8
|
Junior Member
Join Date: May 2022
Location: PEORIA
Posts: 20
|
Asked for more pictures, here you go.
Picture 1 - just showing wiper flap of seal is about an inch and half wide
#2 - slide part way out, left side, can see wiper or flapper part of seal torn from to top about center of the window
#3 - closer view - shows where torn off from left to right (near top of window)
#4 - top of right side starting to tear
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|