Need the rails and bars for rear bed slidout on a keystone outback rs 10 2009

[Chris24151]

I bought this camper with no rails and bars for support on rear bed slidout and can buy or find them anywhere please help it's a rs23 keystone outback 2009 model

[JRTJH]

Try here:

https://www.trekwood.com/parts-searc...arch-keywords=

They can usually help locate parts and are happy to sell them to you.... HOWEVER: Their shipping charges, especially for "freight type items" is O U T R A G E O U S !!!! If you have cardiac issues, take your meds before asking the price !!!!!

[Chris24151]

I looked and didn't see anything that would work it's almost looks like a awning arm with a rail on the bottom of the slide out is what I need

[Chris24151]

They are discontinued but how do I sleep in the slide out with no support rails not the rail on the inside of the camper I need the ones to hold it out side they go from underneath the slide out to the back bumper of my camper on the rear not siderear just the back under the rear slide out

[JRTJH]

Take a few photos of what you're talking about and post them on the forum. Maybe that will help identify what you need.

[Chris24151]

I need what the arrows are pointing too the rails and bars on the bumper

[JRTJH]

I believe what you're looking for is listed on that page. It's the far right "no image available" that's 3 down from the top.

https://www.trekwood.com/products/17...deout-Supports

You'll need to verify that it is the correct assembly with Trekwood.

You could also "build a set" using 3/4" and 1" conduit with a hole drilled through the two parts to hold them in position by using a pin through the two pipes.

[Roni344]

Originally Posted by Chris24151

I need what the arrows are pointing too the rails and bars on the bumper

Did you able to get those bar that u looking for??

[wiredgeorge]

Originally Posted by Roni344

Did you able to get those bar that u looking for??

Ron, If you click on the posting member's name you will see he hasn't been on this site in over three years. Hopefully you will find you answer but you won't find it from the OP. Sorry.