Additional Fuzion storage

[aktmracer]

I was looking for a good way to store my grey/black tank dump hoses. Didn’t like the idea of storing them in a tub in a nice storage compartment since that can’t breathe or dry. Noticed the unused area in front of the propane tanks and started thinking. I moved the propane tank mount back a few inches so the front edge is 5-1/8” from the cross brace (See pic). This left about an inch of clearance behind the tanks. Then cut a piece of expanded metal to fit and creat a breathable floor. On the right side I left a 6”x4” tab which at 1” I bent up 90 degrees to close off the front void (See drawing). Now that I look at installed probably going to make a new one that covers the rear corner just for looks. Now I can put the hoses in here with a small tub for fittings and attachments. My apologies for the rudimentary install guide lol.

[spicercars]

That should work.