Insect screen attachment
I like using the coarse mesh bug screens but don't trust the little mounting springs (which are the devil to install!)
I now mount them with stainless steel wire. Cut a piece six inches or so in length. Loop it around the inlet grill you are covering, give it a twist to hold in place and the pass the two wire legs through the mesh screen. Pull the wire snug and give it several twists to secure, leaving it a bit long. Snip off the extra wire and bend the twisted pigtail back into the mesh so that the sharp ends are not sticking out to scratch you up. I ordered the wire from Amazon.
Sorry about the rotated images.
__________________
Woody
Cedar Creek Lake, Texas
2019 Laredo 290 SRL
2019 Ram 2500, 4x4, Cummins diesel
Andersen hitch
|