Cracked Lino

[Numbers624]

Just pulled the monty out of its long winter nap to get new tires installed when I discovered a crack on the lino from the door curving towards and under the refer. so I searched here and found others with cracked lino but my question is how do I fix it? or replace it? what are my options? I've attached photo's thx

[JRTJH]

If I remember correctly, there were a few years around the time yours was built that had vinyl that was prone to cracking in cold weather. I don't know if Keystone has any program to help with the situation, but if you are planning to do it yourself, probably the easiest way would be to cut it all along the outer edge, measure and cut a replacement vinyl sheet from Lowes or HD, staple it around the perimeter and then put some 1/2" quarter round to cover the staples. I wouldn't suggest gluing it down, if you do and you get a burn or another crack or blemish, it would be harder to replace.

[Numbers624]

ok there's a slide that comes in over it so how do you get the vinyl under the slide part I've never looked to see what's under it or how the vinyl is attached under the slide As far as the year that's what I've come to concluded in reading this forum this is my first keystone bought it at the end of august last year so far I still very happy I don't think changing it out would be to hard.