|
05-15-2019, 07:17 AM
|
#1
|
Junior Member
Join Date: Apr 2019
Location: Folsom
Posts: 18
|
Help, need to install 110 volt outlet
I have a 2018 Bullet 272BHS. It did not come with an electrical (110V) outlet at the base of the double bunks. My understanding is some previous years did have an outlet installed there. I opened up the bottom bunk and looked underneath. The hot water heater is there along with the outdoor shower housing. I am trying to find a place to tap into 110V. There is 110V under there but it is for the hot water heater. I was told not to tap into that because the hot water heater needs a dedicated 110V line. That is completely understandable. The only Romex cable I see under there is coming from the floor into what looks like a junction box, and then into the hot water heater. Can anyone provide assistance as to where to tap into? I did open the 110V outlets at the head of the bunks, but the Romex is heading up into the ceiling. Any assistance is greatly appreciated. Thanks in advance!!
|
|
|
05-15-2019, 07:56 AM
|
#2
|
Site Team
Join Date: Jun 2009
Location: Venice
Posts: 5,346
|
Quote:
Originally Posted by 1av8tr
I have a 2018 Bullet 272BHS. It did not come with an electrical (110V) outlet at the base of the double bunks. My understanding is some previous years did have an outlet installed there. I opened up the bottom bunk and looked underneath. The hot water heater is there along with the outdoor shower housing. I am trying to find a place to tap into 110V. There is 110V under there but it is for the hot water heater. I was told not to tap into that because the hot water heater needs a dedicated 110V line. That is completely understandable. The only Romex cable I see under there is coming from the floor into what looks like a junction box, and then into the hot water heater. Can anyone provide assistance as to where to tap into? I did open the 110V outlets at the head of the bunks, but the Romex is heading up into the ceiling. Any assistance is greatly appreciated. Thanks in advance!!
|
You should be able to tap into that line. If it is the last outlet on that circuit tap off the outlet itself. If not you can add a junction box and than feed both outlets (old and new) from it. Hope this helps. It goes without saying ...BE SURE TO DISCONNECT SHORE POWER FIRST!!!.
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|
|
|
05-15-2019, 08:09 AM
|
#3
|
Junior Member
Join Date: Apr 2019
Location: Folsom
Posts: 18
|
Thank You! Are you talking about tapping into the hot water heater line or the outlet at the head of the bunk?
|
|
|
05-15-2019, 09:50 AM
|
#4
|
Senior Member
Join Date: Jul 2016
Location: Western NY
Posts: 586
|
The hot water heater is fused for (I don't know) but it's way more than the 15 AMPS that regular plugs are fused for. DO NOT tap into the hot water heater line.
You could wind up melting or starting a fire from whatever is plugged into that line because it's designed for a 15 AMP circuit.
Find an outlet circuit that you will not be using for anything else and extend that circuit.
__________________
#####################
Rob
Bereft of TT and looking.
2020 Chevy Silverado 1500 LTZ Z71 6.2L
|
|
|
05-15-2019, 09:59 AM
|
#5
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,327
|
The WH 110VAC is on a 15 or 20A breaker. He will fine tapping into the junction box at the water heater.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
05-15-2019, 10:45 AM
|
#6
|
Senior Member
Join Date: Mar 2017
Location: Colbert
Posts: 248
|
Just be careful on what you plug into those outlets once you get it wired. In other words, I would NOT suggest having an electric heater plugged into the outlets at the same time you are running the hot water heater or you might be looking for a tripped breaker in short order
__________________
2017 Avalanche 320RS 5'er
2022 Ford F-350 Lariat Ultimate with 6.7L Diesel
Andersen Ultimate 5th Wheel hitch
|
|
|
05-15-2019, 12:24 PM
|
#7
|
Junior Member
Join Date: Apr 2019
Location: Folsom
Posts: 18
|
Thank You!
|
|
|
05-15-2019, 12:26 PM
|
#8
|
Junior Member
Join Date: Apr 2019
Location: Folsom
Posts: 18
|
I think I’m going to try and tap into the outlets at the head of the bunks.
|
|
|
05-15-2019, 02:37 PM
|
#9
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,985
|
Quote:
Originally Posted by 1av8tr
I think I’m going to try and tap into the outlets at the head of the bunks.
|
I think tapping into the bunk outlet is the better of the two options. Either will work, but if you tap into the water heater line, you do run the risk of having problems with a tripped circuit breaker if you plug a "high amp" item (heater, hair dryer, etc) into that secondary plug and the water heater element is on or if it "calls to be on" while the other item is operating.
My recommendation, for what it's worth, is to check to see what size ROMEX is on the bunk plug and use that same size ROMEX so you'll have appropriate amperage ratings for your extension. It's OK to "size up" the ROMEX extension, but it's dangerous to "size down" with a smaller gauge wiring. To keep things simple, just use the same size as the rest of the circuit.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
05-15-2019, 09:43 PM
|
#10
|
Junior Member
Join Date: Apr 2019
Location: Folsom
Posts: 18
|
Thank You! I decided to tap into the outlet at the head of the lower bunk.
|
|
|
05-16-2019, 02:51 AM
|
#11
|
Senior Member
Join Date: Mar 2015
Location: Southeastern Connectiut
Posts: 1,306
|
Good choice. It might be a little more work, but you will have power to the outlet, even when the electric water heater switch is not turned on.
Good Luck,
__________________
Pull Toy
Steve & Jan, Ava & Emma (Mini Schnauzers):
2016 F350 Lariat 4X4 Powerstroke CC/SB "PULLTOY V"
2013 Alpine 3535RE "MAGIC CARPET IV"
Proud Navy Vet!
|
|
|
05-16-2019, 02:58 AM
|
#12
|
Junior Member
Join Date: Apr 2019
Location: Folsom
Posts: 18
|
Thank You!
|
|
|
05-26-2019, 09:22 AM
|
#13
|
Senior Member
Join Date: Sep 2017
Location: Qualicum Beach
Posts: 555
|
Current is drawn NOT pushed. Always safe to add lower consumer to higher provider but unsafe the other way around. Now that does not mean it will work if breaker is 20A and heater is kicking on while a high draw whatever he is adding also kicks in at the same time which will trip the breaker so that the wiring to both is saved from overload. Is using propane for water heater an option? More information is needed like what he wants to plug in.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|