black tank

roy 24689 · 10-28-2015, 05:17 AM

hello everybody i have a little problem here id like to get it fixed before i go back on the road again. wintering in az now. my black tank cable is binding on me it always have but its getting harder to close now.asked keystone about it they told me to go to rv place and have them fix it.if i wanted to do that i would have already. ok so now i was under it last year looking around as i remember its a blue gray tank and the cable is going thru a cover realy wasnt to close to it to look at it good i'm sure someone has taken it off i hope. its a 2012 montana maybe 40 gal tank.just like to maybe pull the valve to look at it fix it maybe ?thanks also while i'm here like the new adds you putting up on the screens. how do i clear the screen.

bsmith0404 · 10-28-2015, 05:27 AM

You most likely have some toilet paper or something in the valve that is causing you some problems. Pretty easy to pull it apart and check. Here is a YouTube video that shows how easy it is.

https://www.youtube.com/watch?v=u-AFa9hyrpI

Festus2 · 10-28-2015, 08:14 AM

Quote:

Originally Posted by roy 24689

also while i'm here like the new adds you putting up on the screens. how do i clear the screen.

Are you asking how to "clear the screen" or get rid of the ads that appear at the top of the pages? If so, the rotating ads have been incorporated into this program and cannot be removed by the members.

In any case, I'm not clear on what you mean by "clearing the screen".

MikeD3534 · 10-29-2015, 06:07 AM

Frankly, I wouldn't spend much time trying to "repair" the cables, but rather replace them. They are available online or at your dealer/rvparts store and the replacement is a pretty straight forward remove and replace. Keystone likes to use the Bristol valves and cables, but Valterra valves and cables are a direct replacement.

**chuckster57** · 10-29-2015, 10:33 AM

Quote:

Originally Posted by MikeD3534

....but Valterra valves and cables are a direct replacement.

And IMO a better product.

Pull Toy · 10-29-2015, 02:33 PM

A little Silicon Spray or WD40 goes a long way. Call me cheap!!!

roy 24689 · 10-30-2015, 04:52 AM

yes its the ads im talking about.how long do they stay on , ive gone to the ad and come back and the ad is still there.i had to get out of the fourm and then get back on. what am i doing wrong. not to computer savery. thanks. as for the cable i tried it already your not the only one that tries to be cheap. nothing wrong with that. that way you will always have some extra money for some other place to spend our money. thanks all

Festus2 · 10-30-2015, 07:23 AM

Quote:

Originally Posted by roy 24689

yes its the ads im talking about.how long do they stay on , ive gone to the ad and come back and the ad is still there.i had to get out of the fourm and then get back on. what am i doing wrong. not to computer savery. thanks.

The ads that appear at the top of the page are there all the time. If you click on an ad, a new page or screen will appear that advertises the product or service. To get rid of the ad page/screen, click on the red "x" of the tab that has the name/title of the ad on it. Clicking on the red x should get rid of the advertisement and bring you back to the forum.
Note: This is the procedure if you are using Internet Explorer as your browser.

dfb · 02-03-2016, 10:43 AM

Quote:

Originally Posted by Pull Toy

A little Silicon Spray or WD40 goes a long way. Call me cheap!!!

NOT ON THIS!!! They had to rip mine apart again... first time the cable was routed around pipes and stuff. Dealer fixed that without checking the blade valve.. NOW they want me to pay 400 for this...It is not a badly lubed cable, but a toilet paper issues caught on the blade due to their lack of doing it right the first time...

**chuckster57** · 02-03-2016, 01:23 PM

Quote:

Originally Posted by dfb

but a toilet paper issues caught on the blade due to their lack of doing it right the first time...

Toilet paper caught on the blade valve is NOT a warranty issue.

You may also like: