|
11-22-2021, 08:45 AM
|
#1
|
Member
Join Date: May 2017
Location: Tupelo
Posts: 47
|
Channel search won't find channels
I have just purchased a new trailer (Jayco) sorry for the swap from Keystone Sprinter, but the deal was too good to turn down. At Rv Park and did channel search and found nothing. Called previous owner and he said "sorry, I had switched it to air from cable." Thanked him and switched it back and did search. No channels. I have tried to reboot tv by unplugging. Changed cables and moved cable to RV slot next to me. Still nothing. Any ideas?
Previous owner did have DISH. I have the DISH antenna and receiver. I guess I could try to get hooked up with DISH.
__________________
Johnnie, Suzanne and Dixie Blue
2018 336fbok Jayco
2011 3500 Ram DRW 6.7 Cummins
|
|
|
11-22-2021, 09:00 AM
|
#2
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,752
|
Sorry but in reading this I'm going in circles. Are you trying to watch cable or OTA (over the air) tv? Have you changed the input on the tv thru the tv menue to match the signal source?
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
11-22-2021, 09:35 AM
|
#3
|
Member
Join Date: May 2017
Location: Tupelo
Posts: 47
|
I am wanting to watch via the cable. The tv was previously set to air and I switched it back to cable. So when I try to find cable channels and do a channel search, it doesn't find any channels.
__________________
Johnnie, Suzanne and Dixie Blue
2018 336fbok Jayco
2011 3500 Ram DRW 6.7 Cummins
|
|
|
11-22-2021, 09:36 AM
|
#4
|
Member
Join Date: May 2017
Location: Tupelo
Posts: 47
|
I have switched the source to cable.
__________________
Johnnie, Suzanne and Dixie Blue
2018 336fbok Jayco
2011 3500 Ram DRW 6.7 Cummins
|
|
|
11-22-2021, 09:45 AM
|
#5
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,752
|
You should have a wall plate with a cable connector and a push button switch. The outlet sends 12v dc to the amplifier in the tv antenna on the roof. That switch needs to be off to watch cable.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
11-22-2021, 09:47 AM
|
#6
|
Member
Join Date: May 2017
Location: Tupelo
Posts: 47
|
yes, I switched that off.
__________________
Johnnie, Suzanne and Dixie Blue
2018 336fbok Jayco
2011 3500 Ram DRW 6.7 Cummins
|
|
|
11-22-2021, 09:49 AM
|
#7
|
Senior Member
Join Date: Nov 2017
Location: Mico, TX
Posts: 7,467
|
Run a cable directly from your pedestal through a window or slide and do a channel search while the TV source is set to cable. It could very well be your camper's outside connector doesn't work.
__________________
wiredgeorge Mico TX
2006 F350 CC 4WD 6.0L
2002 Keystone Cougar 278
2006 GL1800 Roadsmith Trike
|
|
|
11-22-2021, 10:03 AM
|
#8
|
Member
Join Date: May 2017
Location: Tupelo
Posts: 47
|
Ok, thank you, that got the signal and channel search found all available channels. So the problem is in the connection in the trailer. Any ideas on how to located the issue?
__________________
Johnnie, Suzanne and Dixie Blue
2018 336fbok Jayco
2011 3500 Ram DRW 6.7 Cummins
|
|
|
11-22-2021, 10:26 AM
|
#9
|
Senior Member
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
|
Quote:
Originally Posted by Rangerj
Ok, thank you, that got the signal and channel search found all available channels. So the problem is in the connection in the trailer. Any ideas on how to located the issue?
|
The cable runs on these things is anybody's guess when new, but with the PO adding satellite to it only he or whomever may have connected it can answer with any certainty.
You can buy a cable toner for a few $$ that would be a great tool to have trying to figure out the mystery. Good luck with finding the hidden splitters from factory & any the PO may have added.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
|
|
|
11-22-2021, 10:27 AM
|
#10
|
Member
Join Date: May 2017
Location: Tupelo
Posts: 47
|
Appreciate your help.
__________________
Johnnie, Suzanne and Dixie Blue
2018 336fbok Jayco
2011 3500 Ram DRW 6.7 Cummins
|
|
|
11-22-2021, 01:12 PM
|
#11
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,752
|
Most older campers will have a wall plate with 2 coax connectors. While using a satellite dish the satellite "box" will be connected to the 2 coax connectors, one in and one out. While not connected to a satellite reciever there should be a short cable "jumper" connecting the two coax outlets on that wall plate.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
11-22-2021, 01:38 PM
|
#12
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
Quote:
Originally Posted by flybouy
Most older campers will have a wall plate with 2 coax connectors. While using a satellite dish the satellite "box" will be connected to the 2 coax connectors, one in and one out. While not connected to a satellite reciever there should be a short cable "jumper" connecting the two coax outlets on that wall plate.
|
There's a photo of this wall plate with a jumper in post #12 this the thread located here: https://www.keystoneforums.com/forum...ad.php?t=36881
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|