2016 Fushion axle question
Need some help, have a 2016 Fushion 345. Recently went to AZ from FL on way back center spring hanger bracket collapsed rolled inward and cracked frame.. I have fixed all of that and have new slipper spring set up but had to remove front and rear spring hangers to replace as they was bent.
Need to find out what the measurement should be from center of front spring hanger to center of middle hanger and measurement from center of back spring hanger to center of middle hanger to make sure I weld mine back at the correct measurements.
Any help would be greatly appreciated from a current 345 toyhauler owner!
|