Low point drain line caps for 2014 Bullet

[rgnmgr]

I need to replace the 2 caps on the rear low point hot and cold drain lines located under the bath area on my 2014 Bullet 272BHS. They are approximately 1" diameter black caps on the red and blue drain lines. I need a part number or place to find them.
Thanx

[chuckster57]

1/2" threaded caps. Most big box hardware stores should carry them.

[slow]

You may want to consider installing ball valves instead of the caps. Makes draining easier.

[chuckster57]

Originally Posted by slow

You may want to consider installing ball valves instead of the caps. Makes draining easier.

Yeah, the low point pex should be 1/2" also. Again, you can get a variety of fittings and crimp rings/crimper at your local HW store. We use Lowes when we don't have the fitting in stock.

[cpaulsen]

I went to HD and bought 2 ball valves. They screwed right on the drain..... makes it easier to drain.

[rgnmgr]

Problem solved (again without any help from Keystone customer? service?). Red and blue drain lines are Pex So only Pex parts will work. I located 1/2" Pex caps at Fergusons Plumbing Supply. Regular 1/2" caps from the big box stores do not work on Pex - theystill leak. Pex caps work!