|
08-01-2016, 03:41 AM
|
#1
|
Member
Join Date: Apr 2016
Location: Upper Midwest
Posts: 65
|
FYI on using the table for a bed.
Hi all, we have a 2016 Passport 217EXP. So far, nothing wrong with one exception.
I converted the table to a bed as it is advertised to be able to do so. It really worked very well for my 215 lb. 6'3" frame. BUT, as I was sitting on the edge of it, close to the head end of it, the staples pulled away on the small wooden rail that supports it and down I went.
I write this to give warning to those who plan on using the table as a bed. It was a very easy fix with grinding the staple legs off that were now exposed and then securing with screws. I added screws on the remaining 2 supports also.
One may want to throw a few screws in before something like this happens as it could be a safety issue with a guest if not just somewhat embarrassing.
Wife and I really like this RV, lots of floor space and three 60 by 80 inch beds for the grandkids when they visit.
__________________
2016 Passport 217EXP
2016 Silverado CC 1500
|
|
|
08-01-2016, 08:40 AM
|
#2
|
Senior Member
Join Date: Jul 2014
Location: Solomons
Posts: 3,874
|
I had not thought about that. A few nuts, bolts, and washers or good wood screws may be in order before we use the dinette as a bed.
__________________
Tom
2019 Alpine 3651RL
2016 F350 CC DRW
|
|
|
08-01-2016, 01:55 PM
|
#3
|
Senior Member
Join Date: Jul 2014
Location: Texas
Posts: 175
|
I agree that the wooden rail is not secured well enough. Before I let anyone make the dinette into a bed, I added screws to the rails. I also made a set of short legs to replace the metal legs when the table is in the bed position. I do not trust the table top to hold 200 pounds+, and certainly didn't want to have to hunt down a new table once this table snapped.
__________________
2010 Bullet 246RBS
2008 F150
and 3 Boston Terriers eagerly awaiting their next trip!
|
|
|
08-01-2016, 05:23 PM
|
#4
|
Senior Member
Join Date: Mar 2014
Location: Las Cruces
Posts: 4,665
|
Always try to sit on the bench seating area and not the center of the table, I've seen them break!
__________________
Brent
2013 Alpine 3500RE
2019 Silverado 2500HD Duramax
U.S. Air Force Retired (25 yrs)
|
|
|
08-01-2016, 07:03 PM
|
#5
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,981
|
Because of weight considerations, most tabletops are made of 1/2" or 5/8" particle board and laminated with the "cheapest" laminate available. As such, I'm really surprised that more people haven't had broken or cracked tabletops. The bench supports "should" hold the tabletop without breaking away from the bench. Gluing and screwing them in place will resolve that problem, but if it only moves the "weakest link" from the support to the center of the tabletop, it will probably mean a more expensive repair. Using "homemade" supports when the tabletop is in the bed position is a great idea, especially if anyone heavier than a preschooler is going to use the bed.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
08-06-2016, 07:10 PM
|
#6
|
Junior Member
Join Date: Jun 2011
Location: Cedar Springs, Mi.
Posts: 14
|
Short legs made of p.v.c. here too, plus a 5 gallon bucket in the middle, close to outside edge to keep it from tipping!
Sent from my VS990 using Tapatalk
__________________
2010 Keystone Passport 300BH
2006 GMC Sierra SLT Crew VortecMax 6.0L 4:10's
Husky Centerline / Tekonsha Prodigy P2
|
|
|
08-07-2016, 04:46 AM
|
#7
|
Member
Join Date: Apr 2016
Location: Upper Midwest
Posts: 65
|
Both are great ideas, the bucket sounds like a nice easy button idea, maybe use some towels under and on top to snug up and just put right in the middle. I will do my experimenting on that one.
__________________
2016 Passport 217EXP
2016 Silverado CC 1500
|
|
|
10-04-2016, 04:33 AM
|
#8
|
Junior Member
Join Date: Jul 2015
Location: Allentown, PA
Posts: 28
|
Re: FYI on using the table for a bed.
The couch is much more comfortable. Plus, you want the extra room, fold it down and make it a bed. When we were in Assateague last year a nasty storm rolled in and two of my youngest daughters ran to us in the front bed bunk,.... no way,... opened the couch and they were better there. My other daughter slept right thru it.
I agree with the added supports though under the table top. Our popup developed a slight curve in the top after my daughter was sleeping on it all season. I made supports to help it, but the curve was already set. Now the 217 solves that problem, plenty of sleeping area.
__________________
Robert
2004 Silverado 1500 Crew Cab 4x4
2016 Passport 217exp
|
|
|
10-04-2016, 05:07 AM
|
#9
|
Senior Member
Join Date: Dec 2015
Location: Houston, TX
Posts: 380
|
Re: FYI on using the table for a bed.
The table top is only particle board, we will only use it as a bed for the grand children, I will never try to get my fat butt on it, thats why we have a bed.
__________________
2016 Passport 2890RL
2007 GMC Sierra 1500
Reese 26000 Weight Distribution and Sway Control
Champion 2800/3100 Inverter Generator
American Ranger Auto Gyro
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|