|
08-03-2021, 09:50 AM
|
#1
|
Junior Member
Join Date: Aug 2021
Location: Willard
Posts: 6
|
Inverter install on a 280CK
I have an 280CK that did not come with an inverter but I see that some of the outlets are marked to support one. I wish to install an inverter to run these outlets. I need to know if this can be done for this trailer if it did not come with an inverter already installed?
|
|
|
08-03-2021, 10:30 AM
|
#2
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,686
|
Welcome to the forum! It would be beneficial to all if you went to the user CP in the upper left corner and filled in a signature with the year, make and model of your RV and tow vehicle. Folks can answer questions much more easily.
You would need to look at your trailer to know what you have. Solar and an inverter are "optional" equipment for your trailer - read 2nd sentence under "what is solarflex".
https://www.keystonerv.com/innovations/solar-flex
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|
|
|
08-03-2021, 10:38 AM
|
#3
|
Junior Member
Join Date: Aug 2021
Location: Willard
Posts: 6
|
Thanks, updated. Our trailer data sheets says "Solar panel prep w/ (5) inverted outlets"
|
|
|
08-03-2021, 10:41 AM
|
#4
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,686
|
Sounds like you don't have it as "prepped" means it's ready for install vs installed. It lists the components that would be used for the installation if installed and you could do it I'm sure if you have the knowledge to do so. I'm not versed in solar installation as I don't want or need it. Others on the forum are however and hopefully they can chime in if you need assistance.
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|
|
|
08-03-2021, 10:47 AM
|
#5
|
Junior Member
Join Date: Aug 2021
Location: Willard
Posts: 6
|
Correct, I do not have it and the only part I wish to have is the inverter to run the 5 outlets.
__________________
Rollin Bryant
Montana High Country 280CK
2021 Sierra HD 2500 Denali V8
|
|
|
08-03-2021, 10:50 AM
|
#6
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,339
|
Quote:
Originally Posted by Oparollin
Correct, I do not have it and the only part I wish to have is the inverter to run the 5 outlets.
|
Is all the required wiring in place?
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
08-03-2021, 11:00 AM
|
#7
|
Junior Member
Join Date: Aug 2021
Location: Willard
Posts: 6
|
yes, talking with Keystone its prep and wired and ready but I cant get any other data from them on the wiring for the inverter ready outlets. I found a DC wire guide but nothing on AC
__________________
Rollin Bryant
Montana High Country 280CK
2021 Sierra HD 2500 Denali V8
|
|
|
08-03-2021, 11:03 AM
|
#8
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,339
|
Quote:
Originally Posted by Oparollin
yes, talking with Keystone its prep and wired and ready but I cant get any other data from them on the wiring for the inverter ready outlets. I found a DC wire guide but nothing on AC
|
That’s probably because the person at Keystone probably has no idea, and most likely told you to contact your dealer. If your tying yo do a DIY install, hopefully a member that has done it will chime in.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -8. The time now is 01:06 PM.