You probably just need to change the seals. 3 types:
Valterra
Valterra BladeX
Bristol.
Once you determine that, get a seal kit 3” and get ready to take the valve apart. 7/16” bolts and nuts. I use axle grease to hold the new seals on the flanges as I put the valve back in. Then I rotate the valve to make sure the seals are where they need to be. After that put 2 screws in on opposite corners, operate the valve to make sure it’s all seated correctly and then put the other screws in.
Valterra Bladex can be used on both Valterra types
Bristol valve requires Bristol seals.
It will be molded on the valve which brand/style.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|