There should be an audio pair plus a video line (red, white, and yellow) from the Jensen DVD player's Audio Out to TV and Video Out to TV. They should be connected to one of the TV's audio and video inputs. You may have to look around in the TV's setup menus to see if that audio can be enabled through the TV.
Critical point: All three lines have to be on the same Audio/Video Out on the Jensen and on the same Audio/Video In on the TV. For example, if the Audio In on the TV is on Input #1 and the Video is on Input #2, you won't get your audio in the TV.
There should be a second audio pair (red & white) from the TV's Audio Out jacks to the Jensen's Audio In jacks. This enables the TV audio from antenna or cable or satellite reception to be passed through the Jensen's amp and out the trailer's various loudspeaker pairs.
Last point: I found that some of the audio/video plugs and jacks will separate very easily so it is possible that something may be unplugged. Trace all three lines all the way from the Jensen to the TV to be sure.
__________________
'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520) GMRS: WQPG808 (462.675 TPL 141.3)
|