|
04-16-2014, 08:10 PM
|
#1
|
Junior Member
Join Date: Apr 2014
Location: Colorado
Posts: 16
|
Screen door causing main door to stick
We have an Outback 210rs. The screen door has an up and down handle to open, and the main door has the standard paddle latch. The screen hooks to the main door and when it's shut tight. The screen door will latch to the strike plate to prevent the screen door from opening, and it makes the outside door "stick". If I pull hard enough the main door will open but the screen stays closed. I am afraid at some point something is going to give. The latch on the screen is plastic.
If I shut the door gently, it seems to be ok. If the 6 year old shuts(slams) the door, that is when it occurs. Not sure if it is supposed to do that or what.
Has anyone else had this happen?
|
|
|
04-16-2014, 08:25 PM
|
#2
|
Senior Member
Join Date: Jun 2013
Location: oxnard ca
Posts: 182
|
sounds like your rig is not leveled right. the doors will stick if not properly leveled front to back and side to side, as well the younger one tend to hang (pull down) on the doors when trying to open. not their fault its just a height issue with them, used to have the same problem with my grandson. goodluck
__________________
John
Now Retired (At Last) Long Time Coming
Soon to be retired after 41 years with DOD
2006 Duramax Silverado 2500HD
2013 327 RES Cougar
|
|
|
04-17-2014, 05:57 AM
|
#3
|
Senior Member
Join Date: Jul 2013
Location: Idaho
Posts: 289
|
We had that problem last year, too. Thought it was not level and checked very carefully. It turned out that the latch for the screen was out of adjustment and had loosened up. The main door was hanging up because of that.
|
|
|
04-17-2014, 11:12 AM
|
#4
|
Junior Member
Join Date: Dec 2012
Location: NJ
Posts: 29
|
I agree with Murphsmom. Mine did it also. I adjusted the screen door catch on the frame inwards so it did not catch when screen door is attached to solid door. It does latch when closed separate.
|
|
|
04-17-2014, 01:20 PM
|
#5
|
Senior Member
Join Date: Dec 2013
Location: Maryland
Posts: 106
|
I had the same problem on my passport 23rb. I adjusted the latch for the screen door, just watch as you open how the mechanisms work and you'll figure it out
__________________
[SIGPIC][/SIGPIC. Passport 23rb. Ford F-150 ecoboost
|
|
|
04-17-2014, 05:15 PM
|
#6
|
Junior Member
Join Date: Jan 2014
Location: behind you
Posts: 24
|
My 2014 did the same thing ,Just adjust the two screws that hold the screen door handle.up or down what ever way it needs to go.Go a head you can do it
|
|
|
04-20-2014, 06:16 PM
|
#7
|
Junior Member
Join Date: Apr 2014
Location: Colorado
Posts: 16
|
Thanks everyone for the reply's. I will make the adjustment tomorrow!
|
|
|
04-21-2014, 04:21 AM
|
#8
|
Senior Member
Join Date: Apr 2014
Location: Berkley
Posts: 751
|
I think mine is doing something like this but not exactly the same.
Mine closes when you close it, and it appears to be shut as pushing on it doesn't open it back up. But when its like this, the main door handle has a lot of play...like its just flopping. When you pull it it will open however.
If you basically slam it, it will shut all the way and you can tell because the handle doesn't have the play anymore and it will be tight. So something isn't aligned just right.
I don't like the idea of slamming the door, because A. its brand new, B. you shouldn't have to (see A, lol), and C. its going to be annoying to my campground neighbors I am sure.
__________________
2022 Ford F150 3.5 Ecoboost SCrew 4x4 MaxTow
2020 Salem Hemisphere Hyper-Lyte 25RBHL
|
|
|
04-21-2014, 04:46 AM
|
#9
|
Senior Member
Join Date: Mar 2011
Location: Washington State
Posts: 859
|
If adjusting the latch on the screen door does not work, check to see if the screen door is rubbing the door frame at the bottom, we tend to pull down on the screen door when we open it up by itself when entering the trailer as we try and balance ourselves on the steps and step sideways and also reach for the grab handle on the opposite side of the door. If the screen door is rubbing at the bottom, just pull up and spring the hinges back .....
__________________
Ron
99 Freightliner FL70 Western Hauler CC 300 HP Cat/Chipped/ Allison Auto
12 Montana 3800RE/Level-Up Auto Leveling/Slide Toppers/MorRyde Hitch/VuQube 2000
01 F350 7.3 PSD Crew Cab DRW 4X4 6 Speed/Chipped
|
|
|
04-21-2014, 06:04 PM
|
#10
|
Junior Member
Join Date: Apr 2014
Location: Colorado
Posts: 16
|
Quote:
Originally Posted by {tpc}
I think mine is doing something like this but not exactly the same.
Mine closes when you close it, and it appears to be shut as pushing on it doesn't open it back up. But when its like this, the main door handle has a lot of play...like its just flopping. When you pull it it will open however.
If you basically slam it, it will shut all the way and you can tell because the handle doesn't have the play anymore and it will be tight. So something isn't aligned just right.
I don't like the idea of slamming the door, because A. its brand new, B. you shouldn't have to (see A, lol), and C. its going to be annoying to my campground neighbors I am sure.
|
When I adjusted the strike plate for the screen door, I noticed that I could also adjust the main door strike plate. You might look to see if you also can adjust your main door strike plate. Perhaps it is just out of alignment there.
|
|
|
04-28-2014, 06:09 AM
|
#11
|
Senior Member
Join Date: Apr 2014
Location: Berkley
Posts: 751
|
Quote:
Originally Posted by Donkey teeth
When I adjusted the strike plate for the screen door, I noticed that I could also adjust the main door strike plate. You might look to see if you also can adjust your main door strike plate. Perhaps it is just out of alignment there.
|
I don't think it has anything to do with the screen door but I haven't had time to take a close look at it.
I did look at it a little this weekend. What it seems like to me is that the main door latch contacts the strike plate....its just really tight. So at times it will be closed and the latch is behind the strike plate but only a little, not fully extended into the opening. Its latched and can't be pushed or pulled open but its not 100% into the strike plate area.
I'm of the mind that I should just let it "break in" as im sure that opening and closing of the door will naturally shave that strike plate or the plate around door latch down to where it opens and closes easily. Still it is annoying.
Everything seems lined up however, and nothing looks loose. Trailer was level. But aside from removing the strike plate and sanding it down with something, I don't see any way to adjust that.
__________________
2022 Ford F150 3.5 Ecoboost SCrew 4x4 MaxTow
2020 Salem Hemisphere Hyper-Lyte 25RBHL
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|