Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Tech Forums > Repairs & Maintenance
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 05-22-2020, 09:58 AM   #1
tech740
Senior Member
 
tech740's Avatar
 
Join Date: Jul 2014
Location: Hemlock
Posts: 816
Trailer brake issues

Helping my father with his trailer and I am stumped. He asked if I would help adjust the brakes on his toyhauler because he didn’t feel they were working while driving. We jacked up one wheel and the brakes had a slight drag like they should. Pulled the pin and it locked up. We did this to each wheel and they worked as they should. We checked continuity at the umbilical and all the wires were good to ground. We then switched to the truck and we have 12 volts when the brake controller is activated. Does this mean the controller isn’t working correctly when the brakes are applied with the pedal? How do you check voltage while hooked up and moving to see if power is being supplied?
__________________
R.J. and Ginger

2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
tech740 is offline   Reply With Quote
Old 05-22-2020, 11:00 AM   #2
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,237
What brake controller? Some won’t show much if any voltage going to the brake if your not moving.
chuckster57 is offline   Reply With Quote
Old 05-22-2020, 11:14 AM   #3
travelin texans
Senior Member
 
travelin texans's Avatar
 
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
The newer trucks the brake controller is proportional, meaning they apply more at different speeds & brake pedal pressure.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
travelin texans is offline   Reply With Quote
Old 05-22-2020, 11:28 AM   #4
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
Most after market controllers here than 20 years old have a "inertia sensor" to provide proportional breaking. But if you are getting 12v at the truck 7 way it should be ok. Every brake controller I know of has an "intensity" adjustment also.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is offline   Reply With Quote
Old 05-22-2020, 11:58 AM   #5
tech740
Senior Member
 
tech740's Avatar
 
Join Date: Jul 2014
Location: Hemlock
Posts: 816
It’s a Primus IQ. It’s older. Last year seemed to have good brakes. This year you can barely feel them. Like I said they are adjusted and show good voltage.
__________________
R.J. and Ginger

2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
tech740 is offline   Reply With Quote
Old 05-22-2020, 01:53 PM   #6
FlyingAroundRV
Senior Member
 
FlyingAroundRV's Avatar
 
Join Date: Oct 2017
Location: Brisbane Australia
Posts: 708
Here's how proportional electric only brakes work:
The activators are electromagnets that when activated by an electrical current are attracted to the side of the rotating brake drum. The friction between the brakedrum and the magnet face pulls the magnet which is attached to an actuating lever that applies some force to the brakes.
To vary the amount of force, the controller tries to vary the amountof friction between the magnet and the drum. To vary the amount of friction, the controller has to vary the amount of magnetic attraction. Since the controller can only supply up to 12 volts and the coils in the magnet are fixed, the magnetic force can only be varied by varying the current through the magnetic coils (voltage and current are like pressure and flow rate of water).
When you disconnect the trailer and measure the voltage at the trailer connection, there is no current flow so you will always see 12V when the controller is active (unless the output transistors are completely dead). However, this doesn't indicate the controller's ability to control the current through the brake magnets.
The best way to test your controller is to remove the back shell from the trailer side connector and connect the trailer to the truck. Then, with the engine running and the brake controller set to full, apply the brakes in the truck hard and measure the voltage going to the brakes. It may still not reach the full 12V because of voltage drops in the wiring and the fact that the magnets have fairly low resistance and are wired in parallel, but it will propbably be near that figure. If it's zero or very low, like 2-3V then your controller might be toast.
HTH
__________________
Regards,
Scott
2015 F250 2WD Crew Cab
2018 Outback 272UFL

https://www.youtube.com/user/TheCscotthendry
FlyingAroundRV is offline   Reply With Quote
Old 05-22-2020, 01:56 PM   #7
sourdough
Site Team
 
Join Date: Feb 2014
Location: W. Texas
Posts: 17,601
Did the controller maybe get "readjusted" somehow"? Here's a link showing how to adjust it in the event it's not set up correctly.

https://www.google.com/search?source...2isAX5vaqABQ39
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
sourdough is offline   Reply With Quote
Old 05-23-2020, 09:43 AM   #8
tech740
Senior Member
 
tech740's Avatar
 
Join Date: Jul 2014
Location: Hemlock
Posts: 816
Quote:
Originally Posted by sourdough View Post
Did the controller maybe get "readjusted" somehow"? Here's a link showing how to adjust it in the event it's not set up correctly.

https://www.google.com/search?source...2isAX5vaqABQ39

We have it maxed out and there is little braking when we use the pedal and stronger when we use the manual over ride. Thinking the controller may need replaced.
__________________
R.J. and Ginger

2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
tech740 is offline   Reply With Quote
Old 06-01-2020, 04:18 PM   #9
hazmat456
Member
 
Join Date: May 2020
Location: Tomah
Posts: 40
Make sure the controller is level side to side. There should be two dials gain and delay.
With both to max and the lever fully engaged is the only time you will see max voltage. Pulling the lever about half way should give 8-9 volts. On the proportional controllers there is a pendulum that will swing, so the controller will only give max voltage at about the same time you coffee spills out of your cup holder with the brake pedal engaged. My bet is that the pendulum is all gummed up with dust and moisture. Blow it out or replace the truck with a 2020 f450, they come from the factory with a truly awesome brake controller.
hazmat456 is offline   Reply With Quote
Old 06-01-2020, 05:13 PM   #10
tech740
Senior Member
 
tech740's Avatar
 
Join Date: Jul 2014
Location: Hemlock
Posts: 816
I wish dad could do the 2020. May have to try the cleaning this weekend.
__________________
R.J. and Ginger

2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
tech740 is offline   Reply With Quote
Old 06-01-2020, 06:52 PM   #11
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,237
Does the Primus IQ have a pendulum? If it does, save the cost of a new truck and just get a prodigy brake control. No pendulum and all it cares about is being “in line” with the tow vehicle front to rear. My prodigy is old (2nd gen) but still works as good as day 1.
chuckster57 is offline   Reply With Quote
Old 06-02-2020, 01:47 AM   #12
tech740
Senior Member
 
tech740's Avatar
 
Join Date: Jul 2014
Location: Hemlock
Posts: 816
When we talked about replacing it prodigy series either 2 or 3 were the only ones I told him to look at. I will see him again this weekend and see if he has made any changes yet. I appreciate all the suggestions. Thanks guys.
__________________
R.J. and Ginger

2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
tech740 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 12:48 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.